Schelinger G8-1P Overcurrent Circuit Breaker Installation Guide
Schelinger G8-1P Overcurrent Circuit Breaker

Installation instructions

Installation Instructions
Installation Instructions
Installation Instructions
Installation Instructions
Installation Instructions

Dustbin Icon Waste electrical products should not be disposed with household waste. Please recycle where facilities exist. Check with Your Local Authorityor retailer for recycling advice.

Dimension

Installation Instructions
Installation Instructions
Installation Instructions

Instructions

Instructions
Instructions
Instructions
Instructions
Instructions
Instructions
Instructions
Instructions
Instructions
Instructions
Instructions
Instructions
Instructions

  1. Rated voltage, frequency.
  2. Work characteristics.
  3. Rated current.
  4. Rated short circuit breaking capacity.
  5. Energy restriction class.
  6. International Protection Rating.
  7. Mechanical strength.
  8. Rated insulation voltage.
  9. Rated surge voltage.
  10. Caution, risk of electric shock.
  11. For internal use.
  12. Terminal capacity.
  13. Working temperature.

Security
Before mounting, read the instructions and disconnect the power supply.
Installation should be performed by a qualified user authorized to mount electrical devices depending on the applicable regulations in a given country, in accordance with the mounting diagram. Modifications to the product may cause threat and loss of warranty. Use protection against frost when working below 0 ° C.

Maintenance
All maintenance work should be carried out after disconnecting the power supply. The product temperature may rise to an elevated value. Before commencing maintenance, make sure that the product temperature is safe to make it. Guarantee unrestricted air supply, do not cover the product. Use dry and delicate materials for cleaning. Do not use chemical agents. Product not adapted to work in an environment with unfavorable conditions, i.e. high dustiness / humidity, water, explosive zones, vibrations, chemical fumes.

Recommendations
Failure to follow the instructions in the manual may result in a fire, electric shock, burns or other damage. Bemko sp. O.o. is not responsible for failure to comply with the above recommendations. We also reserve the right to make changes to the manual – the current version is available at  www.bemko.eu.

Bemko Sp. z o.o.
ul. Bocznicowa 13
05-850
www.schelinger.eu

Company Logo

Documents / Resources

Schelinger G8-1P Overcurrent Circuit Breaker [pdf] Installation Guide
G8-1P, G8-3P, G8-1P Overcurrent Circuit Breaker, G8-1P, Overcurrent Circuit Breaker, Circuit Breaker, Breaker

References

Leave a comment

Your email address will not be published. Required fields are marked *