SATECHI 883275 USB-C On-The-Go Multiport Adapter Instructions
Installation Instructions
- Attach one of the included cables to the adapter’s USB-C port.
Shorter cable will slide in/out from the adapter. Longer cable is also included to use as a docking station
- Connect the adapter to a USB-C PD or Thunderbolt 3 port on your device.
- Connect a PD charger to the adapter’s USB-C PD charging port. Max output 100W
- Connect a direct HDMI or VGA cable to its respective port on the adapter to output display.
HDMI supports up to 4K 60Hz, VGA up to 1080p 60Hz Connect one display at a time or mirrored together
- Connect a RJ45 cable to the adapter’s Ethernet port for wired network access.
Up to 10/100/1000 Mbps
- Connect USB peripherals to the adapter’s USB-C and USB-A data ports.
Data ports do not support charging or video output
Does not support Apple SuperDrive
- Insert microSD or SD cards into card reader slots.
OPERATING TEMPERATURE RANGES 86-122°F / 30-50°C
Documents / Resources
![]() |
SATECHI 883275 USB-C On-The-Go Multiport Adapter [pdf] Instructions 883275, USB-C On-The-Go Multiport Adapter |