S S REGELTECHNIK 36500-2024 Humidity and Temperatures Sensors Calibratable
Specifications:
- Voltage Supply: <1.2 W / 24 V DC; <1.8 VA / 24 V AC
- Unit System: Modbus (RTU-Mode), Address range 0…247 adjustable
- Sensor Protection: Clean air and non-aggressive, non-flammable gases
- Measurement Range: < 95% RH, non-condensing air
- Sensor Size: 108 x 78.5 x 43.3 mm (Without Display) / 108 x 78.5 x 45.8 mm (With Display)
- Protection Class: III (according to EN 60730)
- Ingress Protection: IP65 (according to EN 60529)
Product Usage Instructions:
Connection Options:
The device can be connected using a plastic cable gland (M20 x 1.5; with strain relief, interchangeable, inner diameter 8 – 13 mm) or an optional M12 connector according to DIN EN 61076-2-101.
Offset Adjustment:
To manually adjust the offset, follow the instructions provided in the manual.
Setting Up W-Modbus (Wireless) as Slave:
Activate pairing mode by pressing the Pair Button for 10 seconds.
- Check the LED status for network and wireless connection.
Network Installation for W-Modbus (Wireless):
Follow the network installation diagram to set up the W-Modbus system with master, gateway, and slave devices.
Configuring Bus Address:
Use the DIP switches to configure the bus address. Refer to the manual for a detailed example of setting the bus address.
FAQ:
How do I calibrate the sensors?
The sensors are calibratable. Follow the provided instructions for calibrating the humidity and temperature sensors.
What is the power consumption of the device?
The device consumes less than 1.2 W with a 24 V DC supply or less than 1.8 VA with a 24 V AC supply.
Documents / Resources
 |
S S REGELTECHNIK 36500-2024 Humidity and Temperatures Sensors Calibratable [pdf] Instruction Manual 6000-3650-0000-1XX, 36500-2024, V101, 36500-2024 Humidity and Temperatures Sensors Calibratable, 36500-2024, Humidity and Temperatures Sensors Calibratable, Temperatures Sensors Calibratable, Sensors Calibratable, Calibratable |
