RYDEEN PSS-001 Digital Mirrors Proximity Sensor Owner’s Manual
Welcome Statement & Warnings
PRECAUTIONS & WARNINGS
IMPORTANT INFORMATION PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE PRODUCT
- Before installation, please check if the product list is complete and free of damage.
- The installation instructions may differ from the actual installation process on a vehicle. If there are any discrepancies, please contact us.
- Installation of this product is for Authorized Dealers only. Any installation not done through an Authorized dealer is not covered under warranty.
- Please read this installation instruction manual carefully before installing the product.
- Before turning on the product after installation, please confirm that the installation and wiring are correct.
- Check whether the installed product functions properly. If there are any issues, please check if all connectors have been securely connected.
- Check if the original vehicle functions are working properly. If there are any issues, please check if all wiring has been securely connected.
- Please do not install the product if you receive a damaged item. Please take photos immediately and contact our Return Department. Photos should be provided that include all parts of the product and can display the damage.
WARNINGS
- DO NOT DROP ANY COMPONENTS OF THIS PRODUCT. Excessive shock due to dropping any components in the system or subjecting it to excessive shock and vibrations may cause malfunction and is not covered by warranty.
- Please install when the vehicle is turned off.
- THE OED-01 UNIT IS NOT WATERPROOF. Avoid exposing it to rain or other
forms of excessive moisture. - Water damage is not covered under the warranty.
- THE FOLLOWING INSTRUCTIONS ARE RECOMMENDED FOR AUTHORIZED RYDEEN MOBILE INSTALLERS.
What’s in the Box
When opening the packaging box of this product, please make sure that all product accessories are complete.
Standard Package
OED-01 Main Unit
Power Wire Harness *1
GPS *1
SD Card 32GB) *1
OPTIONAL ACCESSORIES
If you want to purchase the optional accessories, please contact your retailer or contact RYDEEN, Toll Free at 1-877-777-8811 (within USA only) for product support, or visit our website: https://rydeenmobile.com/
RYDEEN DIGITAL MIRRORS PV8-A & PV8-B (SOLD SEPARATELY)
RYDEEN PROXIMITY SENSOR (SOLD SEPARATELY)
Proximity Sensor Sensing Range
The proximity sensor works under the parking monitoring mode, and 30-second SOS video will be recorded after triggering. The proximity sensor is installed on the front windshield or the roof of car, which can be installed horizontally or vertically according to the application scenario. Please refer to the following scenarios and detection distance.
Scenario 1: Install the proximity sensor on the front windshield vertically, facing front.
Scenario 2: Install the proximity sensor on the front windshield vertically, facing rear.
Scenario 3: Install the proximity sensor on the roof of car in horizontally, facing down.
Product Overview
OED-01
FRONT BACK
SIDE
| No | Item | Description |
| 1 | Front facing camera | Adjustable lens structure with 140 deg wide viewing angle. |
| 2 | Power button | Long press to power ON/OFF. Short press to ON/OFF video recording. |
| 3 | Photo button | Short press to take a photo. |
| 4 | Reset button | Press and hold within reset hole to restart the OED-01. |
| 5 | Mic hole | The Mic hole can record sound. |
| 6 | Recording indicator | Normally it is red when recording, the blue light will flash if recording process stops. |
| 7 | MicroSD card slot | Insert or remove microSD card. |
Wiring Diagram
Connect to Rydeen Digital Mirror (Models: PV8-A/PV8-B):
Installation
Installation Method
- Clean the inside front windshield;
- Choose the installation location of unit, make sure it does not affect the driver’s sight, then attach the 3M adhesive side on the front windshield;
Note: Make sure that the position of the DVR main unit will not affect the placement and the SD card. - Wiring: Route the wiring harness along the gaps in the vehicle interior, and use pry tool to stuff the wiring harness into the gaps to avoid exposure;
- Connect the power supply: Connect the power cable to the power point and make sure it is firmly connected;
- Test function: After installation, test whether the DVR works properly;
- Restore vehicle interior: After the installation is complete, restore the removed vehicle interior to ensure everything is back to its original condition.
Installation Precautions
- Remove protective lens covering prior to use.
- System is designed for +12V DC systems only.
Installation Reference Position”
APP Interfaces
To connect to mobile phone:
Please download the Viidure from the following QR Codes.
Viidure
iOS
Android
Main Interface
Video Recording Icon
OED-01 records at startup (default). When the system stops recording, the icon will appear like. To enter the setting menu, you must stop recording. To start/stop recording simply press on the icon. The OED-01 recording interval is 1min for normal videos and 30sec for SOS files. The videos will be saves as “MOV” format.
Photo Icon
Select the photo icon to take a snapshot. Image will be saved as “JPEG” format in picture folder.
Mic Icon
Choose ON/OFF of sound recording
Camera File
You can check the loop videos, locked videos, parking monitoring videos and snapshots in camera files.
Camera Setting Icon
Select this icon to enter the setting menu.
Sound Recording—-ON/OFF sound recording.
Beep Sound—-ON/OFF beep sound.
Loop Record Options—-Select the recording time, there are four options (Off, 1 min, 2 min, 3 min).
Exposure Compensation—-Adjust the brightness of recording video.
Time Stamp—-Recording video will show date and time if select ON.
Anti Flicker—-Select display refresh rate.
Camera Language—-Select DVR language, there are two languages (English and Chinese).
Date Format—-Select Year, Month, Date format for recording videos.
Motion Detection—-N/A
Wi-Fi Name—-Enter this option to modify the Wi-Fi name.
Wi-Fi Password—Enter this option to modify the Wi-Fi password. Default password:12345678
Firmware Version—Shows current software version installed in your device.
Format—-Select this option to delete all files in the microSD card.
Factory Reset—-Select this option to reset all settings back to default.
Note: After connecting the mobile APP, the DVR function can only be controlled through the mobile phone.
Specifications
| OED-01 | |
| Lens | 4G+2P |
| Aperture | F1.8 |
| Diagonal Angle | 140° |
| Recording Resolution | 1920*1080 |
| Video Encoding Format | H.264 encoding, H.265 encoding, MOV format storage |
| Effective Pixels | 2 million |
| Photo Format | JPEG (1080P) |
| G-Sensor | Three axis accelerometer sensor |
| Recording Mode | Loop recording |
| Video Output | 1080P AHD 30pfs |
| Storage | MicroSD (>Class 10, maximum 256G) |
| Starup Time | 1s |
| Working Voltage | 12V |
| Working Current | 150mA (DC 12V) |
| Static Current | Below lmA |
| Storage Temperature | -22°F—+176°F (-30°C–F80°C) |
| Operating Temperature | +5°F—+167°F (-15°C—+75°C) |
| Operating Humidity | 15°Ary60WoRH |
| Battery | Button battery ML621 |
| Wide Voltage Adaptation | Adapt to the power supply environment inside the vehicle (5V/30V) |
Maintaining Your GPS
Cleaning the Unit:
- Use a soft, dry cloth to wipe away dirt.
- If the dirt cannot be wiped away, dampen the cloth with water to clean the unit. NOTE: Do not wash the unit with running water as this unit is not water proof.
- Use a dry cloth to wipe away residual moisture when done.
NOTE: Do not use solvent, car cleaner or organic cleaners to clean the unit. These substances may damage the GPS unit.
Technical Support Contact Info
For any questions about OED-01, please contact your retailer or RYDEEN Technical Support:
- Phone: 1-877-777-8811 (within USA only) or 1-310-787-7880
- Email: tech1@rydeenmobile.com
- Web: https://rydeenmobile.com/contact-support/
One Year Limited Warranty
RYDEEN MOBILE (a manufacturer of “RYDEEN” products) warrants product (OED-01) only to the original purchaser as described following:
Warranty Period:
Rydeen warrants this product for a period of one (1) year from the original purchase date.
Warranty Coverage:
This warranty covers all defects in material and workmanship except as specified below.
- Any products distributed outside of the USA by Rydeen North America, Inc. (Rydeen) or which is not purchased in the USA or Canada unless the product is purchased through the USA Military Exchange Service.
- Any product(s) which are purchased from an unauthorized retailer (in store or online).
- Any products in which the serial number label or the model number label are removed, torn, modified or replicated.
- Any damage defects or malfunctions resulting from any of following:
a) When defect occurs during shipment of product (freight carrier’s responsibility)..
b) Installation or removal of product.
c) Accidents, act of nature, misuse, abuse, neglect, unauthorized product modification or failure to follow product owner’s manual instructions.
d) Any repair or attempt to repair without RYDEEN authorization.
e) Any other cause which is not related to product defect.
f) Any cosmetic damages due to normal wear and tear,
g) Any consumable items (such as fuse or batteries).
If any problems develop with your Rydeen products during or after the Limited Warranty Period, or if you have any questions regarding the operation or installation of the product, you should contact your Rydeen retailer. If the problem or your question is not handled to your satisfaction, please contact Rydeen Customer Service Department at 1-877-777-8811 (within the USA only) Monday-Friday between 8:00 AM to 5:00 PM Pacific Standard Time or visit www.Rydeenmobile.com.
To Obtain Warranty Service
If warranty service is required for your Rydeen product:
- Please call Rydeen Customer Service Department at 1-877-777-8811 (within the USA only), Monday-Friday between 8:00 AM to 5:00 PM Pacific Standard time and obtain a Return Authorization Number (“RA”) Number.
- Please pay for any shipping charge to Rydeen Customer Service Department. Rydeen will pay the return shipping charge, if the repair or service was performed during the warranty period. Rydeen will ship freight collect (recipient is responsible for shipping charge) if Rydeen determine the service was performed outside of warranty period or exclusions described above. Rydeen will not accept warranty service requests from outside of the U.S.A. even if product was purchased in the USA.
- Please include a copy of your original purchase receipt including Rydeen product model number, purchase date, retailer name/address and a RA Number whenever your product is sent for warranty service.
- Rydeen will pay for all labor and material expenses for covered product during warranty period.
- Shipping address for Rydeen Customer Service Department is following: Rydeen North America, Inc. (a manufacturer of Rydeen products), 2701 Plaza Del Amo, Unit 705, Torrance, California 90503, USA.
Disclaimer
The information in this user’s manual is for general guidance. The images in the manual may be similar to the images shown in the actual product, but they do not exactly match. Depending on the optional package, some functions described in the manual may not be available or the functions described may be restricted.
Troubleshooting
Solutions for Common Problems:
- NO display: Check to ensure the unit cable is properly connected and terminal connection is not loose.
- APP connection failure: Please check whether you are connected to the
Wi-Fi of OED-01. If you are still unable to enter the app after connecting to Wi-Fi, please insert a small pin into the reset hole and restart unit. - GPS suddenly no signal:
a. You have entered a tunnel or other area where there is no GPS signal.
b. Please check whether the GPS cable is loose or disconnected. - No video (screen without red dot):
a. The microSD card is not formatted or corrupted.
b. The microSD card is not inserted in place. - The video freezes when playing on the computer, and the video is not coherent: Replaced with a formatted high-speed card.
Rydeen North America, Inc.
2701 Plaza Del Amo, Suite 705, Torrance, California 90503 USA
Phone: 1-877-777-8811 Fax: 1-310-943-3778
Copyright © 2024 Rydeen North America, Inc. All Rights Reserved.
RYDEEN® is a registered trademark of Rydeen North America, Inc.
These materials are protected by copyright law and international treaties. Any unauthorized use, reproduction or distribution of these materials, or any portion herein, will result in severe civil and criminal penalties and fines. Violators will be prosecuted to the fullest extent of the law.
Documents / Resources
 |
RYDEEN PSS-001 Digital Mirrors Proximity Sensor [pdf] Owner's Manual PSS-001 Digital Mirrors Proximity Sensor, PSS-001, Digital Mirrors Proximity Sensor, Mirrors Proximity Sensor, Proximity Sensor |