RunCam Robin User Manual
NTSC & PAL System Switchable
The default is NTSC system. If you want to change to PAL system, please:
- Short-circuit the two camera control pins.
- Then power on, camera will restart in PAL system in about 2 seconds.
- The system can be saved after power off. After switching to the desired system, please unplug the short-circuit cable.
Joystick Control
Dimensions & Installation
OSD Menu
Parameters
|
Modell |
Robiin |
| Image Sensor |
1/3″ 120dB WDR CMOS |
|
Horizontal Resolution |
700TVL |
| Lens |
1.8mm (M8) FOV160° 2.1mm(M8) FOV 145° |
|
Mirror/Flip |
Available |
| Signal System |
NTSC / PAL Switchable |
|
S/N Ratio |
>50dB |
| Electronic Shutter Speed |
Auto |
|
Auto Gain Control (AGC) |
Auto |
| Min. Illumination | |
|
WDR |
120dB |
| DNR |
2DNR |
|
Day/Night |
Color/B&W |
| Menu Control |
JOYSTICK |
|
Power |
DC 5-36V |
| Current |
120mA@5V 50mA@12V |
|
Housing Material |
ABS |
| Net Weight |
5.5g |
|
Dimensions |
L19mm*W19mm*H18mm |
| Latency |
6ms(Min) |
Documents / Resources
 | Robin |
References
- User Manualmanual.tools
Published: August 8, 2021
Updated: August 10, 2021