Filter Selection Guide
User Guide
Filter Selection Guide
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
||
| Applikation | Detail description | PE-Filter 40µm | PTFE-Filter 10µm | PTFE-Filter 2µm | Wire mesh Filter 10µm | Wire mesh Filter 15/25µm | PE-Filter 2µm |
| Building automation without condensation | Normal application | ✓ | |||||
| Office | Normal application | ✓ | |||||
| Laboratory in general | Normal application | ✓ | |||||
| Chemistry | Normal application | ✓ | |||||
| Chemistry | Waterproofness required | ✓ | |||||
| Meteorology | In weather hut / normal environment | ✓ | |||||
| Meteorology | In weather hut/ fine dust | ✓ | |||||
| High humidity with condensation | Normal application | ✓ | |||||
| High humidity with condensation | Corrosive environment / polluted air | ✓ | |||||
| Fine dust | Greater than 10µm particles | ✓ | |||||
| Fine dust | Greater than 2µm particles | ✓ | |||||
| Fine dust | Greater than 1µm particles | ✓ | |||||
| Drying processes | <= 100 °C / without fine dust | ✓ | |||||
| Drying processes | <= 100 °C / with fine dust | ✓ | |||||
| Drying processes | <= 200 °C / without fine dust | ✓ Metal carrier | |||||
| Drying processes | <= 200 °C / with fine dust / larger than 10µm particles | ✓ Metal carrier | |||||
| Drying processes | <= 200 °C / with fine dust | ✓ Metal carrier | |||||
| HVAC | Standard | ✓ | |||||
| HVAC | Speed >30m/s or abrasive flow | ✓ | |||||
| Abrasive parts in the air flow | Normal application | ✓ | |||||
| Greenhouse | Normal application | ✓ | |||||
| Storage without condensation | Normal application | ✓ | |||||
| Bearing without condensation | With fine dust | ✓ | |||||
| Warehouse without condensation | ✓ | ||||||
| Forwarding halls | With fine dust | ✓ | |||||
| Medical clean rooms | Normal application | ✓ | |||||
| Medical clean rooms | With wipe cleaning | ✓ | |||||
| Flour production | Dry / fine dust | ✓ | |||||
| Flour production | Humid environment (short-term) | ✓ | |||||
| Paint shop | With solvent | ✓ | |||||
| Paint shop | Water-soluble paints | ✓ | |||||
| Climatic chambers 180 °C | Normal application | ✓ Metal carrier | |||||
| High temperature applications | < 200 °C general | ✓ Metal carrier | |||||
| High-temperature applications | < 200 °C fine dust | ✓ Metal carrier | |||||
| High temperature applications | < 200 °C abrasive environment | ✓ | |||||
| Agricultural applications | Normal application | ✓ | |||||
| Maritime applications (buoys, etc..) | Normal application | ✓ |
! Please note that this filter selection guide is for general guidance only, based on typical use cases. Rotronic/PST assumes no liability for the selection and use of filters based on this guide. Always consult Rotronic’s official product documentation or PST’s support team for comprehensive specifications.
Documents / Resources
![]() | Filter Selection Guide |
References
Published: December 18, 2023
Updated: December 19, 2023






