RM2642 BLE Module
“
Specifications:
- Product Name: Rosemount RM2642 BLE Module
- Bluetooth Specification: Bluetooth Low Energy Core
Specification 5.0 - Operating Frequency: 2.4GHz ISM
- Minimum Operating Distance: 20 cm from all persons
Product Usage Instructions:
1. Safety Guidelines:
It is crucial to follow the safety guidelines for the Rosemount
RM2642 BLE Module:
- Ensure installation is done by qualified personnel as per
applicable codes. - For hazardous locations, follow Product Certifications and
System Control Drawing. - Maintain physical security to prevent unauthorized access and
protect equipment.
2. Product Recycling/Disposal:
Proper disposal is important for environmental protection:
- Recycle equipment and packaging according to local
regulations.
3. Bluetooth Security Information:
The UID and key can be found on the display unit and an attached
paper tag.
4. Radio Specifications:
The BLE module complies with Bluetooth Low Energy Core
Specification 5.0:
- Operates in the 2.4GHz ISM frequency band.
- Expected to operate with a minimum distance of 20 cm from
individuals.
5. Regulatory Compliance:
The product complies with EU Radio Equipment Directive and FCC
rules for the USA:
- EU Compliance standards: EN 300 328, EN 301 489-1, EN 301
489-17, EN 62311:2020 - FCC Compliance for the United States (Part 15 of FCC
Rules). - ISED Compliance for Canada with license-exempt
transmitter(s)/receiver(s).
FAQ:
Q: Where can I find the UID and key for the Rosemount RM2642
BLE Module?
A: The UID and key are located on the display unit and on an
attached paper tag.
“`
Quick Start Guide May 2025
RosemountTM RM2642 BLE Module
Quick Start Guide
May 2025
1 About this guide
This guide provides instructions for the Rosemount RM2642 BLE Module. This module is intended to be used only with compatible Rosemount sensors. Refer to applicable product’s Reference manual for instructions on how to set up the -LCD/Bluetooth Display.
1.1 Safety messages
WARNING
Failure to follow safe installation and servicing guidelines could result in death or serious injury.
Ensure the transmitter is installed by qualified personnel and in accordance with applicable code of practice.
For installations in hazardous locations, the transmitter must be installed according to the Product Certifications document and System Control Drawing.
WARNING
Physical access
Unauthorized personnel may potentially cause significant damage to and/or misconfiguration of end users’ equipment. This could be intentional or unintentional and needs to be protected against.
Physical security is an important part of any security program and fundamental in protecting your system. Restrict physical access by unauthorized personnel to protect end users’ assets. This is true for all systems used within the facility.
1.2
Product recycling/disposal
Recycling of equipment and packaging should be taken into consideration and disposed of in accordance with local and national legislation or regulations.
2
Emerson.com/Rosemount
Quick Start Guide
May 2025
1.3
Bluetooth® UID and key
You can find the UID and key on the display unit and on the attached paper tag.
Figure 1-2: Bluetooth Security Information
1.4
Radio Specifications
The BLE module has been designed to be fully compliant with Bluetooth Low Energy Core Specification 5.0. It operates in the 2.4GHz ISM frequency band and is expected to operate with a minimum distance of 20 cm from all persons.
1.5
EU Compliance
This product demonstrates compliance to the EU Radio Equipment Directive (RED) 2014/53/EU and following standards:
EN 300 328 V2.2.2 EN 301 489-1 V2.2.2 EN 301 489-17 V3.2.4 EN 62311:2020
3
Emerson.com/Rosemount
Quick Start Guide
May 2025
1.6 United States – FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:
· This device may not cause harmful interference; this device must accept any interference received, including interference that may cause undesired operation.
· This device must be installed to ensure a minimum antenna separation distance of 7.9 in. (20 cm) from all persons.
· When integrating into a host, the extra label shipped with the module must be applied to the exterior of the host.
· This module can only be used in the following devices:
1. Rosemount 3144S
2. Rosemount 4051S
Changes or modification to the equipment not expressly approved by Rosemount Inc. could void the user’s authority to operate the equipment.
4
Emerson.com/Rosemount
Quick Start Guide
May 2025
1.7 Canada – Innovation, Science and Economic Development Canada (ISED)
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.
Changes or modification to the equipment not expressly approved by [Emerson] could void the user’s authority to operate the equipment.
L’émetteur/récepteur exempt de licence contenu dans le present appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1. L’appareil ne doit pas produire de brouillage; 2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Les changements ou les modifications apportés à l’équipement qui n’est pas expressément approuvé par [Emerson] pourraient annuler l’autorité de l’utilisateur à utiliser cet équipement
5
Emerson.com/Rosemount
*00825-0300-4418* Quick Start Guide May 2025
For more information: Emerson.com ©2025 Emerson. All rights reserved. Emerson Terms and Conditions of Sale are available upon request. The Emerson logo is a trademark and service mark of Emerson Electric Co. Rosemount is a mark of one of the Emerson family of companies. All other marks are the property of their respective owners. The “Bluetooth” word mark and logos are registered trademarks owned by Bluetooth, SIG, Inc. and any use of such marks by Emerson is under license.
Documents / Resources
 |
Rosemount RM2642 BLE Module [pdf] User Guide 3408, RM2642 BLE Module, RM2642, BLE Module, Module |