ROCkER-LoGo

ROCKER Tanfill 100 Flow Filtration SystemROCKER-Tanfill-100-Flow-Filtration-System-Product-image

NEW Life Sciences Tangential Flow Filtration System

Features

  • Multi-purpose Tangential flow filtration technique enables concentration and defiltration at same run.
  • Less membrane fouling Feed flows parallel to membrane and thus prevents membrane fouling and increases membrane utility.
  • Easy scale-up Use same parameters and conditions from trial to mass production.
  • Plug & start Integrated with pump, liquid reservoir and pressure gauges. Plug the tube, add samples and start processing.
  • International certification CE certification RoHS certification
  • One-Year Warranty

Applications

  • Concentration and desalting
  • Diafiltration and purification
  • Buffer exchange and dialysis

Ordering Information

184100-01(02) Tanfil 100, Tangential Flow Filtration System, AC100-240V, 50/60Hz, US plug (EU plug)

Tanfil 100 Specification

Model PERFORMANCE DATA
Max. inlet pressure 60 psig
Max. gauge pressure 80 psig
Recirculation flow rate 0~600 mL/min
Min. recirculation volume 7 mL PES Reservoir, 500 mL
Noise level 55 dB
Net weight 7.8 Kg
Dimension (LxWxH) 28 x 33 x 16 cm
ELECTRICAL DATA OTHER DATA
Power input 100-240V
Frequency 50 / 60Hz
Max. power 50W
Safety Motor Overload Protection, Fuse
Applicable capsules
Tanfil 100
* Each unit includes a peristaltic pump, a reservoir, pressure
gauges, a magnetic stirrer and tubing.

Product Usage Instructions

  1. Make sure the machine is plugged into a power source and switched on.
  2. Connect the sample tube to the machine’s inlet port.
  3. Add the desired samples to the liquid reservoir.
  4. Adjust the recirculation flow rate according to the desired concentration/diafiltration rate.
  5. Monitor the pressure gauge to ensure that the system is functioning correctly.
  6. Once the desired concentration/diafiltration is achieved, stop the machine and disconnect the sample tube.
  7. Clean the machine thoroughly before storing it away.

Tangential Flow Filtration System

Features

Multi-purpose
Tangential flow filtration technique enables concentration and diafiltration at same run.

Less membrane fouling
Feed flows parallel to membrane and thus prevents membrane fouling and increases membrane utility.

Easy scale-up
Use same parameters and conditions from trial to mass production.

Plug & start
Integrated with pump, liquid reservoir and pressure gauges. Plug the tube, add samples and start processing.

International certification
CE certification RoHS certification.

One-Year Warranty
Applications

  • Concentration and desalting
  • Diafiltration and purification
  • Buffer exchange and dialysis

Ordering Information

184100-01(02)
Tanfil 100, Tangential Flow Filtration System, AC100-240V, 50/60Hz, US plug (EU plug)

203100-01
MS 100, Low Profile Magnetic Stirrer with AC100-240V adaptor, US/EU plug

203100-10
PTFE Magnetic Stirring Bar, Ø 3.6 x 25 mm

184100-47
TYGON®, Sani-Tech® Ultra-C Platinum-cured Silicone Tubing, ID 1/8″ x OD 1/4″, 50 ft

184100-48
Pharmed® BPT Tubing, ID 1/8″ x OD 1/4″, 25 ft

Specification

Model Tinfoil 100
PERFORMANCE DATA
Max. inlet pressure 60 psig
Max. gauge pressure 80 sprig
Recirculation flow rate 0~600 mL/min
Min. recirculation volume 7 mL
Reservoir PES Reservoir, 500 mL
Noise level 55 dB
Net weight 7.8 Kg
Dimension (LxWxH) 28 x 33 x 16 cm
ELECTRICAL DATA
Power input 100-240V
Frequency 50 / 60Hz
Max. power 50W
Safety Motor Overload Protection, Fuse
OTHER DATA
 

 

Applicable capsules

• Pall, Miniate™ TFF Capsules

• Sartorius, Sartocon Slice 50

• Merck, Pellicon® XL 50 Device

Contact us for capsule compatibility of others.

Each unit includes a peristaltic pump, a reservoir, pressure gauges, a magnetic stirrer and tubing.

Documents / Resources

ROCKER Tanfill 100 Flow Filtration System [pdf] Owner's Manual
Tanfill 100 Flow Filtration System, Tanfill 100, Flow Filtration System, Filtration System

References

Leave a comment

Your email address will not be published. Required fields are marked *