ROCKBOARD RBO-POW-BLO-ISO-6v Iso Power Block
Product Usage Instructions
- Connect the included power adapter to the input socket of the ISO Power Block V6+.
- Insert the correct regional plug adapter into the power adapter.
- Connect the power adapter to the outlet – the power indicator LED will light up.
- Connect the included power cables to your effects pedals and the ISO Power Block V6+.
- Use effects pedals with a polarity of (-) center / (+) outside and correct input voltage.
- Ensure the current draw of your effects pedals does not exceed the maximum current output of each slot and total output.
FAQ
- Q: Can I use a power adapter with different specifications?
- A: It is recommended to use only the included power adapter or one with identical specifications to prevent overheating and damage to the unit.
- Q: What should I do if the power indicator LED does not light up?
- A: Check the connections and ensure the power adapter is correctly plugged into both the unit and the outlet. If issues persist, contact customer support.
- Q: How can I determine the correct input voltage for my effects pedals?
- A: Refer to the specifications provided by the manufacturer of your effects pedals. Using an incorrect voltage may damage your equipment.
DESCRIPTION
The RockBoard® ISO Power Block V6+ is a multi-power supply for effects pedals, designed with 5 isolated transformers highly filtered 9V DC power slots, and a single USB slot:
- 5 x switchable slots with 9V DC / 12V DC / 15V DC / 18V DC – each with a maximum current output of:
- 500 mA at 9V,
- 375 mA at 12V,
- 300 mA at 15V,
- 250 mA at 18V
- 1 x USB 5V with a maximum current output of 1A
The RockBoard® ISO Power Block V6+ was designed for powering up to 5 effects pedals simultaneously without any noise. The advanced filtering technology used in the 9V DC power slots prevents high-frequency noise. Built with individual slot short circuit protection, connected effects pedals are protected in case of a short circuit. Designated red LEDs for each power slot indicate short circuits or wrong polarity. You can quickly identify any problems without losing power to the remaining pedals.
POWER SUPPLY
- The RockBoard® ISO Power Block V6+ is powered by an included 18V DC power adapter, with a current output of 2,000 mA.
- It is rated for an input voltage of 100 to 240 volts and 47 to 63 Hz alternate current.
CAUTION: Please use only the included power adapter or one with identical specifications to avoid overheating and damage to the unit.
CONNECTION AND USE
- Connect the included power adapter to the input socket of the ISO Power Block V6+.
- Insert the correct regional plug adapter into the power adapter.
- Connect the power adapter to the outlet – the power indicator LED will light up.
- Connect the included power cables to your effects pedals and the ISO Power Block V6+.
IMPORTANT NOTES: Make sure to use only effects pedals with a polarity of (-) center / (+) outside and with the correct input voltage, to prevent damage to your effect pedals. Check that the current draw of your effects pedals does not exceed the maximum current output of each slot and the max. total current output.
INCLUDED ACCESSORIES
- 1 x 18V DC power adapter (2,000 mA) with exchangeable multi-regional plug adapters (EU, UK, US/CA, AU/NZ), input voltage 100-240V AC
- 5 x RockBoard Flat Power Cable, 60 cm – for connecting effects pedals
SPECIFICATIONS
- 5 isolated transformers & highly filtered switchable power slots with 9V DC / 12V DC / 15V DC / 18V DC – each with a maximum current output of 500 mA at 9V, 375 mA at 12V, 300 mA at 15V, 250 mA at 18V, 2.1 x 5.5 mm barrel plug, polarity (-) center)
- Maximum output power: 22.5 W
- 1 x USB 5V with a maximum current output of 1A
- Short circuit protection for all power slots, designated red LEDs for each slot indicate a short circuit or wrong polarity
- Virtually noise-free operation
- Input voltage: 18V DC
- Dimensions: (L x W x H): 120 x 70 x 26 mm /4 23/32″ x 2 3/4″ x 1 1/32″
- Weight: 195 g / 0.43 lbs
CONTACT
- USA DISTRIBUTION: Framus & Warwick Music USA, Inc. | info@rockboard.net | 629.202.6790
- NORTH EUROPEAN DISTRIBUTION: www.rockboard.de | info@rockboard.de | www.w-distribution.de | www.facebook.com/warwickmusicdistribution
- Headquarters: Warwick GmbH & Co. Music Equipment KG | 08258 Markneukirchen / Germany | +49 (0) 37422 / 555 – 0
- Family Owned Solar Powered Sustainably Manufactured in a Green Environment
Documents / Resources
 |
ROCKBOARD RBO-POW-BLO-ISO-6v Iso Power Block [pdf] Instruction Manual RBO-POW-BLO-ISO-6v Iso Power Block, RBO-POW-BLO-ISO-6v, Iso Power Block, Power Block, Block |