roborock Floor Cleaning Solution User Manual

roborock Floor Cleaning Solution

Ingredients

Less than 5%: nonionic surfactants, detergent builder, fragrance, colorant, benzisothiazolinone.

Instructions For Use

• Added in tank: Dilute the solution according to the dilution ratio of 1:200, that means 2.5 cap of solution (20ml) need to be diluted with 4L water.
• Added in solution cartridge: No need to dilute, pour solution into the cartridge directly.

WARNINGS

• CAUSES SERIOUS EYE IRRITATION.
• CONTAINS (BENZISOTHIAZOLINONE), MAY CAUSES AN ALLERGIC SKIN REACTION.
• Do not swallow. Do not get in eyes.
• If swallowed, call a Poison Control Center or doctor immediately. If in eyes, rinse cautiously with water for several minutes.
  Remove contact lenses, if present and easy to do.
  Continue rinsing. If eye irritation persists, get medical advice/attention. If on skin, rinse well with water.
  WARNING
• Keep the solution out of reach of children and pets to avoid overturning or swallowing by mistake.
• Store in a cool and dry place within the range of 0-30°C (32-86°F) and keep sealed.
• Read label before use.

Manufactured for: Beijing Roborock Technology Co., Ltd.
Address: Room 1001, Floor 10, Building 3, Yard 17, Anju Road, Changing District, Beijing, P.R. China.
Manufactured by: Suzhou Fervor Blue Biological Technology Co., Ltd.
Address: No.78 Keeling Road, SND Zone, Suzhou, P.R. China.
For more information about this product, visit our website: www.roborock.com
Made in China.
UFI: TT4H-Y323-EROE-XDJW.

Customer Support

Importer:
Boyko s.r.o.
Pod Vinicio 931/2, 301 00 Plzen
www.beryko.cz