Richmat HJC18 Ble Control Box Instructions

Contents hide

Button label	function
1	The head motor extends.
2	The foot motor extends.
3	The head motor retracts.
4	The foot motor retracts.
5	The motor runs to the M1 position (with an initial value) with one key. Multiplexing function: flashlight + M1, the backlight flashes twice, entering the one-key release mode can reset the memory positions of M1 and M2 to the factory default settings at the same time.
6	The motor runs to the M2 position with one key (there is an initial value).
7	Press the flashlight to light up and automatically turn off after 15s. Multiplexing function: press and hold the flashlight button for 5 seconds, the backlight flashes, release the flashlight, press M1 or M2 within 2 seconds, the control box “beep beep beep” will memorize the current position, if not press M1 or within 2 seconds M2 exits the edit memory position mode;
8	FLAT one-key reset, all motors retract to the minimum stroke position (not reset after power-on). Multiplexing function: press FLAT and flashlight at the same time for 3s, the backlight flashes 3 times, and enter the continuous pressing mode at this time.
Note: Press any button for more than 50s, the remote control will enter sleep, release it and press it again to resume the function. The one-key release mode can follow the synchronization, and the continuous pressing mode does not follow the synchronization.

	Richmat HJC18 Ble Control Box [pdf] Instructions HJ8258, 2AJJGHJ8258, HJC18 Ble Control Box, Ble Control Box, Control Box
	Richmat HJC18 Ble Control Box [pdf] Instruction Manual HJC18, HJC18 Ble Control Box, Ble Control Box, Control Box, Box