IKEA BESTA Instructions

IKEA BESTA Instructions
ikea besta

What’s in the Box

What's in the Box
What's in the Box

  1. 2x
    What's in the Box
  2. 2x
    What's in the Box
  3. 4x
    What's in the Box
  4. 2x
    What's in the Box
  5. 2x
    What's in the Box
  6. 2x
    diagram
  7. 1x
    What's in the Box
  8. 1x
    diagram

Product Overview

Product Overview
Product Overview

Installation

Installation
Installation
Installation
Installation
Installation
Installation
Installation
Installation

 

Documents / Resources

PDF thumbnailBESTA
Instructions · BESTA
PDF thumbnailBESTA
Instructions · BESTA, IKEA

References

Published: July 29, 2021
Updated: July 30, 2021

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Answered questions

What are the functions of the brackets with codes 115444 and 115443 in the IKEA BESTA hinge kit?

In the IKEA BESTA system, the parts with codes 115444 and 115443 are shelf support brackets (specifically left and right versions) used to secure shelves inside the cabinet frame.Function: These brackets are designed to...

Read full answer How do I assemble a BESTA drawer with hinge guides?

Based on the IKEA BESTA documentation, the assembly of components involving hinges and soft-closing mechanisms follows these general steps:Hinge Attachment: Attach the hinge plates (part #130451) to the door or drawer front using the...

Read full answer

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. What are the two brackets in the hinge kit with code 115444 and 115443
    Cosa sono le due staffe nel kit cerniere con codice 115444 e 115443

    Federico asks <em>What are the two brackets in the hinge kit with code 115444 and 115443<e/em>
    Cosa sono le due staffe nel kit cerniere con codice 115444 e 115443
    Manuals+ clarified question
    Question

    What are the functions of the brackets with codes 115444 and 115443 in the IKEA BESTA hinge kit?

    Answer

    In the IKEA BESTA system, the parts with codes 115444 and 115443 are shelf support brackets (specifically left and right versions) used to secure shelves inside the cabinet frame.

    • Function: These brackets are designed to clip into the pre-drilled holes on the interior side panels of the BESTA unit.
    • Installation: As shown on page 28 of the manual, they are secured using screw 116637. Once installed, the shelf is placed on top of these brackets to hold it firmly in place.
    • Orientation: Part 115444 and 115443 are mirrored versions of each other to fit the left and right sides of the cabinet interior respectively.

    Read the full Q&A page

    Reply

  2. good morning, I would like to know how to assemble a besta mobile drawer with hinge guides, thanks
    buongiorno vorrei sapere come si monta un cassetto mobile besta guide cerniere grazie

    franco cavaliere asks <em>good morning, I would like to know how to assemble a besta mobile drawer with hinge guides, thanks
    buongiorno vorrei sapere come si monta un cassetto mobile besta guide cerniere grazie
    Manuals+ clarified question
    Question

    How do I assemble a BESTA drawer with hinge guides?

    Answer

    Based on the IKEA BESTA documentation, the assembly of components involving hinges and soft-closing mechanisms follows these general steps:

    • Hinge Attachment: Attach the hinge plates (part #130451) to the door or drawer front using the provided screws. Ensure they are oriented correctly as shown on page 3 of the hinge manual.
    • Cabinet Mounting: Secure the corresponding hinge arm to the interior side of the BESTA cabinet frame.
    • Soft-Close Mechanism: If your unit includes the soft-closing buffer (part #124216), you must first install the mounting plate (#124217) inside the cabinet using screws (#113286). The buffer then clicks into place on this plate (see pages 6-7).
    • Adjustment: Once attached, you can adjust the alignment of the front panel using the screws on the hinge arm:
      • The front screw adjusts the side-to-side position.
      • The center screw adjusts the depth (in/out).
      • The top and bottom screws on the mounting plate adjust the height.

    Note: For a 'mobile' drawer (one on wheels), ensure you have followed the base frame assembly first, including the installation of any casters or legs before attaching the drawer runners and hinges.

    Read the full Q&A page

    Reply

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.

IKEA TROTTEN Underframe Sit Stand Table Top Instructions
October 1, 2026
IKEA KALLSINNIG Wine Glass Plastic Orange Instruction Manual
October 1, 2026
IKEA RULLERUM 2-Seat Sofa With Electric Recliner Instruction Manual
October 1, 2026
IKEA KALLSINNIG Wine Glass Installation Guide
October 1, 2026