103136 Control Net Interface
“
Product Information
Specifications
- Power: 5 VDC, 350 mA (jumper for 6 VDC)
- Fieldbus Interface: BNC connector
- Diagnostic LEDs: Module status and network
status
Product Usage Instructions
Installation
- Ensure the device is powered off before installation.
- Connect the ControlNet interface to the designated port on the
indicator. - If using a coaxial cable with cord grips, consult the factory
for the appropriate cable.
Powering the Device
Make sure to provide a stable power supply of 5 VDC with a
current rating of at least 350 mA. Optionally, you can use a jumper
for a 6 VDC power supply.
LED Indicators
The diagnostic LEDs on the module indicate the status of the
module and the network. Refer to the user manual for detailed LED
status indications.
FAQ
Q: What power supply should I use for the ControlNet
interface?
A: It is recommended to use a 5 VDC power
supply with a minimum current rating of 350 mA. You can also use a
jumper for a 6 VDC power supply if needed.
“`
Part Number/Price
Part # Description 103136 ControlNet interface for 920i indicator Cables Consult factory for coaxial cable with cord grips
Options/Accessories
Part # Description 103122 Additional operating manual
PN 103136
FIELDBUS CARDS
ControlNetTM Interface
920i®
Price Consult
Standard Features
· Option for 920i · Polled I/O connection · Onboard LED diagnostics · Floating-point commands support decimal points
Specifications
Power: 5 VDC, 350 mA (jumper for 6 VDC)
Fieldbus Interface: BNC connector
Diagnostic LEDs: Module status and network status
Dimensions: 2.13 × 3.38 × 0.59 in (86 × 54 × 15 mm)
Temperature Range: 14 °F to 158 °F (-10 °C to 70 °C)
Price Consult
INDICATORS / CONTROLLERS
FIELDBUS CARDS
EtherNet/IP® Interface
720iTM/920i®
Part Number/Price
Part # Description 87803 EtherNet/IP protocol card for 720i/920i indicators
Options/Accessories
Part # Description 88537 Additional operating manual
PN 87803
Price Consult
Standard Features
· Industrial protocol for Allen-Bradley PLC and other EtherNet/IP compliant devices
· IP address settings configurable with onboard DIP switches, web page, or ARP or DHCP
· Supports Rockwell Automation® EtherNet/IP level · CE marked and UL conformance · Onboard diagnostic LED · Supports the Modbus/TCP protocol and conforms
to Modbus/TCP specification 1.0
Specifications
Power: 5 VDC, 350 mA
Fieldbus Interface: RJ-45
Diagnostic LEDs: Module status and network status
Dimensions: 2.13 × 3.38 × 0.59 in (86 × 54 × 15 mm)
Temperature: 14 °F to 158 °F (-10 °C to 70 °C)
Price Consult
www.ricelake.com | Phone: 800-472-6703 An ISO 9001:2015 Accredited Company ©2024 Rice Lake Weighing Systems 1/24 Prices and specifications subject to change without notice. Visit ricelake.com for current prices.
551
Documents / Resources
 |
RICE LAKE 103136 Control Net Interface [pdf] User Guide 103136, 87803, 103136 Control Net Interface, 103136, Control Net Interface, Net Interface, Interface |
