SCT-1100
Quick Setup Guide
Key Functions
| Key | Function |
 ZERO |
In setup: scroll forward through parameters In numeric input: decreases digit to be modified |
 TARE |
In setup: scroll back through the functions In numeric input: increases digit to be modified |
 MODE |
In setup: quickly position the first step of a menu In numeric input: selects digit to be modified, from left to right |
 PRINT |
In setup: enter into a parameter or to confirm asetting In numeric input: confirms the entry made |
| C ON/OFF | Turn the instrument on/off In setup: exit a step without confirming the setting In numeric input: clears the present value |
- Press the ON/OFF key (C) to turn the instrument on.
- Press the mode key ( ) when the firmware version displays to enter the setup menu.
- Press the print key () in the setup menu to view/select the parameter choices.
Note
When settings are complete press C until the indicator displays 
. Press to save set up and return to weigh mode. Pressing any other key exits the setup and discards changes.
Wiring Diagram
| Pin Number | Label | Description |
| VE 12-24 VDC Power Supply | ||
| 1 | +VDC | +12-24 VDC |
| 2 | GND | 0 VDC (GND) |
| Inputs and Outputs | ||
| Optoisolated Inputs Positive Logic (12-24 VDC, 5-20 mA max) | ||
| 3 | COM | Common Output |
| 4 | IN1 | Input 1 |
| 5 | IN2 | Input 2 |
| Relays | ||
| 6 | RL1 | Relay 1 |
| 7 | RL2 | Relay 2 |
| 8 | COM | Common Relay |
| Analog Output | ||
| Voltage | ||
| 9 | I+ | +20 mA |
| 10 | I- | -0 mA (GND) |
| Current | ||
| 11 | V+ | +10 V |
| 12 | V- | 0 V (GND) |
| Serial Port | ||
| RS-485 | ||
| 13 | (A) 485 + Line | |
| 14 | (B) 485 – Line | |
| RS-232 | ||
| 15 | TX | Transmission |
| 16 | RX | Reception |
| 17 | GND | Ground |
| Load Cell 1 | ||
| 18 | SIG+ | Signal + |
| 19 | SIG- | Signal- |
| 20 | SEN+ | Sense + |
| 21 | SEN- | Sense- |
| 22 | EXC+ | Excitation + |
| 23 | EXC- | Excitation – |
| Load Cell 2 | ||
| 24 | SIG+ | Signal + |
| 25 | SIG- | Signal – |
| 26 | EXC+ | Excitation + |
| 27 | EXC- | Excitation – |
| Load Cell 3 | ||
| 28 | SIG+ | Signal + |
| 29 | SIG- | Signal – |
| 30 | EXC+ | Excitation + |
| 31 | EXC- | Excitation – |
| Load Cell 4 | ||
| 32 | SIG+ | Signal + |
| 33 | SIG- | Signal- |
| 34 | EXC+ | Excitation + |
| 35 | EXC- | Excitation – |
230 W. Coleman St.
Rice Lake, WI 54868
USA USA: 800-472-6703
International: +1-715-234-9171
© Rice Lake Weighing Systems
Content subject to change without notice.
www.ricelake.com
PN 185438 Rev B
Documents / Resources
 |
RICE LAKE WEIGHING SYSTEMS SCT-1100 Signal Conditioning Transmitter [pdf] User Guide SCT-1100 Signal Conditioning Transmitter, Signal Conditioning Transmitter, Conditioning Transmitter, Transmitter |