Reverie R600/R650 Signal Frequency/Non-Bluetooth Remote Instructions

Pairing a Remote to a Power Base
(Signal Frequency/Non-Bluetooth)

NOTE: The power base is paired to its remote upon delivery. If for some reason you should need to pair the two, follow these instructions.

Step 1
Place batteries into a remote control (3 x AAA batteries)

Step 2
Check that the power base is plugged into a functioning outlet.
Step 3
Press the learn button underneath the base (on the control box) for 3 seconds.

Step 4
When the button illuminates to green on the control box the radio frequency code setting function will be activated.
Step 5
Press any button on the remote control.
Step 6
When the receiver light flashes, you have completed the learning process of the radio frequency code.