xantrex 808-0817-02 FREEDOM X Bluetooth Remote Panel Firmware User Guide
Upgrade Procedure for
FREEDOM X Bluetooth Remote Panel Firmware
Download the latest firmware version from www.xantrex.com
Computer | Internet Connection | USB Drive | Access to FREEDOM XC PRO inverter/charger
STEP 1
On a USB stick, create a folder titled exactly:
FreedomX_Firmware
STEP 2
Place the desired remote firmware file REMOTE.bin onto the stick inside the FreedomX_Firmware folder.
Note that the remote firmware file must be renamed exactly to REMOTE.bin.
STEP 3
Safely eject the USB from the PC.
STEP 4
Turn off all AC loads and turn off the vehicle engine.
Ensure that the inverter/charger remains powered on.
STEP 5
Insert the USB into the inverter/charger unit. Upon inserting the USB stick, the FREEDOM XC PRO inverter/charger LED should flash showing that the USB is recognized and the firmware is being downloaded.
During this update, all LEDs on the remote panel should be on and the remote will not be functional.
STEP 6
After the LED has stopped flashing, use the remote’s local display to view the remote firmware screen (U2) which should show the new remote firmware version.
Read More About This Manual & Download PDF:
Documents / Resources
 |
xantrex 808-0817-02 FREEDOM X Bluetooth Remote Panel Firmware [pdf] User Guide 808-0817-02, FREEDOM X Bluetooth Remote Panel Firmware |
