BRC-12CR Side Mount Belt Rack
NOTE: SHOWN FOR RIGHT WALL MOUNT.
FOR LEFT WALL MOUNT:
REMOVE ACORN NUTS, ROTATE FRONT PLATE 180 AND RE-INSTALL ACORN NUTS.
This drawing is the property of Rev-A-Shelf (RAS) and is disclosed in confidence to the extent its subject matter is original to RAS. Any vendor receiving this drawing from RAS shall hold and use this drawing for the sole benefit of RAS and shall not disclose it to, or use or reproduce it for any third party, or perform any act adverse to the interest of RAS with respect to this drawing without the express written permission of RAS. Vendors shall not revise any physical, dimensional or performance characteristic unless authorized by Rev-A-Shelf Engineering.
| B | 4/3/2012 | KRR | ECN12-020 |
| A | 9/22/11 | BKT | ECN11-058 |
| REV. | DATE | BY | DESCRIPTION OF CHANGE |
NOTE: HOLDS 7 BELTS
| PART DIMENSIONS | ||
| MIN | MAX | |
| WIDTH | 2. | |
| DEPTH | 12. | |
| HEIGHT | 2. | |
| WEIGHT | ||
| DIAMETER | ||
| RADIUS | ||
| CONTAINTER CAPACITY | ||
| CONTAINER UOM | ||
| SLIDE SPECIFICATIONS | ||||
| SLIDE TYPE | BALL BEARING | SLIDE EXTENSION | FULL | MAX WEIGHT RATING |
| SLIDE CLOSING | NORMAL | SLIDE LENGTH | 300 MM | |
| SLIDE MOUNTING | SIDE | SLIDE FINISH | 100 LB | |
| MIN CABINET OPENING | |
| WIDTH | 2.5 |
| DEPTH | 12 |
| HEIGHT | N/A |
PRODUCT MAX WEIGHT RATING
CUSTOMER DRAWING
| INCH | AMERICAN PROJECTION  |
BY | DATE | |
|||||
| DRAWN IZE |
BKT | 7/14/2011 | |||||||
| SIZE B |
BELT RACK 12″ | ||||||||
| TOLERANCES MAT. DEC. (WOOD) .XX ±.03 [.8mm] (OTHER) .XX ±.02 (ALL) .XXX ±.005 [.13 FRACTIONS ±1/32 |
[.5mm] mm] [.8 mm] | ANGLES ±1/2° |
MATERIAL | DRAWING NO BRC-12CR_CUST |
SCALE 0.500 |
||||
| FINISH | PART NO. BRC-12CR |
SHEET OF 2 2 |
|||||||
Documents / Resources
 |
Rev-A-Shelf BRC-12CR Side Mount Belt Rack [pdf] Instruction Manual BRC-12CR Side Mount Belt Rack, BRC-12CR, Side Mount Belt Rack, Mount Belt Rack, Belt Rack, Rack |
