RETRO FIGHTERS D6 Wireless Gamepad User Guide
CONTROLLER LAYOUT
get to know your controller
*HOME BUTTON IS A START BUTTON WHILE USED ON DREAMCAST FOR AUTHENTIC FEEL
PAIRING INSTRUCTIONS
sync up and get ready to play
Wait for a stable LED light on receiver for successfull pairing
DO NOT PRESS RECEIVER SYNC BUTTON WHILE PLUGGING IN. RECEIVER WILL ENTER THE FI¥ UPGRADE MODE. RE-PLUG TO CANCEL FW UPDATE MODE
- Navigate to: SETTINGS > CONTROLLERS AND SENSORS
- Turn on: PRO CONTROLLER WIRED COMMUNICATION
- Check that your USB receiver or cable connetion is secure
- Retry initial pairing instructions
INPUT MODES & MACROS
customize your experience
Dreamcast Z/C Button Mode:
- Dreamcast natively supports C/Z buttons! However, not all games support these buttons… Thankfully we added a macro to enable full G/Z button mode.
■ Hold (-)+C to enable
Alternate Mode:
- Not all fighting game mappings are the same! We have added an alternate mode to cover most use cases. If you know one not mentioned feel free to reach out 1o our team for added support
- There are two modes normal and a secondary mode that is able to change button assignments. In normal mode you cannot change button assignment S0 there is always a standard profle to roll back to
(see BUTTON MAPPING GUIDE)
■ Hold (+)+(-) to enable- Within the alternate mode hold L + (+)
Switch Alternate Mode:
- Switch controllers use a seperate macro to swap the button asignments.
(sec BUTTON MAPPING GUIDE)
■ Hold (+) +(-) to enable
Switch Trigger to Shoulder Mode:
- We have added this macro to simply swap the shoulder and trigger button input positions
■ Hold (-)+Z
Input Mode Swap:
- Some games and devices prefer one protocal over another. This macro allows free swapping between X and D-Input modes for best compatibility
■ Hold HOME (triangle button) to enable
platform / mode specific input
LED GUIDE
understanding all LED patterns
FAQ
frequently asked questions
The DPAD is not working in the correct mode, how do I fix it?
- Make sure that the mode switch s in the correct mode, if DP (ll the way 1o the left) or RS (al the way (o the right). Not all games use the same input method so it is best check what mod your game accepts for movement/etc.
My controller is acting weird, how do I reset the controller?
- You can reset the controller o factory settings by pressing the button through the small hole on the back of the shell. A small paperclip or pin should be perfect to press this button.
Why is my D6 not connecting to my PC?
- Make sure that after you plug in the USB dongle that you hold down the top of the USB dongle so that it enters pairing mode. Simply press sync on the 1op of the controller o instantly complete the connection.
How do | check for the latest firmware?
- Our firmware updates will be listed on the controller’s product page on our website (RetroFighters.com)
CUSTOMER SERVICE
We strive to make our fellow gamers happy. If you experience any issues with this product please contact us directly. We are here to help and will make it right! You email us at:
SUPPORT@RETROFIGHTERS.COM
Documents / Resources
![]() | RETRO FIGHTERS D6 Wireless Gamepad [pdf] User Guide D6, D6 Wireless Gamepad, D6, Wireless Gamepad, Gamepad |