RESPONSE QV3876 3 Channel Dash Camera
SPECIFICATIONS
BEFORE FIRST USE
- Before using your product, please read all the safety and operating instructions thoroughly. Please ensure you follow the steps below before using the product. We recommend you keep the original packaging for storing the product when not in use.
- Find a safe and convenient place to keep this instruction manual for future reference.
- Unpack the product but keep all packaging materials until you have made sure your new product is undamaged and in good working order. Ensure you have all accessories listed in this manual.
SAFETY
- To prevent damage it is recommended to store the unit out of sunlight when not in use.
- Do not leave the dash camera exposed to heat or in a high-temperature environment such as an unattended car in direct sunlight.
- Do not immerse or expose the dash camera to rain, water, humidity, or other liquids.
- The dash camera is designed for use indoors/inside the vehicle
- Before using the dash camera it is recommended to check your local and state laws where you intend to use the device. Laws may prohibit or restrict where/ what can be placed on your windshield.
- Do not dispose of it in the fire. Check with local authorities on the disposal of lithium battery products.
BOX CONTENTS
PRODUCT DIAGRAM
IN VEHICLE INSTALLATION
Insert MicroSD Card
Insert a suitable MicroSD card (Class 10) into the dash camera, taking care that the gold contacts are facing towards the LCD screen side. Push the memory card until it clicks into place.
NOTE: Use the edge of a small object to push the memory card in place if required Take care that the card has ‘clicked’ into place, a second push inwards will release the memory card. Do not remove or insert the memory card when the dash camera is turned on. This may damage the memory card.
Attach the mount to the dash camera
Place the mount in space on the dash camera. (refer to Fig. 2)
Connect the car power cable
Connect the supplied power cable to the dash camera’s USB port.
Plug the power cable into the 12-24VDC outlet of your vehicle.
The dash camera will automatically power on and start recording once power is available. In some vehicles, this will be when connections are made, for others the dash camera will power on once the ignition has been turned on. Route the power cable around the windshield to the 12-24VDC socket, ensuring that your view is not obstructed (refer to Fig. 4) and that the cable is not a distraction.
NOTE: Do NOT wire the dash camera directly to a 12VDC supply by cutting the cigarette plug off the end of the cable, or permanent damage will result.
Attach the out to the windscreen.
Attach the mount to the windscreen.
Straighten the dash camera. a
Ensure that the dash camera is horizontal and faces straight out of the windscreen. Ensure that objects on the dash camera display appear level, and adjust as required.
Attach the dash camera to the windscreen.
When you are satisfied with the placement and orientation of the dash camera, firmly place the mount on the windscreen.
Adjusting the dash camera
With the mount attached to the windscreen, ensure that objects on the dash camera display are level and adjusted as required. Ensure that the road ahead is at the center of the image, in the central third of the display. If too much of the sky is visible it may risk underexposing details on the road; ensure that the road ahead is visible on the dash camera display. Do NOT attempt to adjust the dash camera while driving.
REAR CAMERA INSTALLATION
The rear camera can be installed above the rear window or the license plate as shown in the diagram below.
NOTE: Please note in running and concealing the cable you will need to be confident in adjusting or modifying areas of your car including internal roof linings, as well as any panels internal and external.
NOTE: Please ensure the unit is installed securely before operating your vehicle.
WARNING: Do not cut or modify the cable. Any modifications to the original product cable or housing may void your warranty.
SPECIAL FUNCTION DESCRIPTION
Automatic on/off
After connecting to the power supply, the camera will automatically start recording, and automatically save and shut down the recording when turned off;
Loop Recording
Automatic loop recordings set to 1,3, or 5-minute files
Motion Detection
When in standby mode, if a moving object is detected a recording will begin. The camera will automatically stop recording and return to standby mode.
G-Sensor
When the camera is subjected to fast changes to its gravity (G-Sensor), it will automatically turn the current video into a locked file, thereby preventing the file from being overwritten in a loop;
Parking Monitoring
In the shutdown state, when the machine is subjected to gravity induction, it will automatically start recording and lock the video (note that this function requires the machine battery to be charged)
One Click Lock Function
Short press the menu button during the recording process, and the machine will lock and save the current video as an indelible file.
STANDARD OPERATIONS
Start-up And Shutdown
Long press the power button to start once, long press the power button to shut down;
NOTE: The dash camera will automatically shut down when the battery voltage is low.
Video Mode
- Short press the MENU key, switch to the video mode, and display the video icon in the upper left corner of the screen;
- Short press the OK button to start the video, and the video icon will appear and flash a red dot, indicating the video works;
Photo Mode
- Short press the MENU key to switch to photo mode, and the photo icon will be displayed in the upper left corner of the screen;
- Short press the OK button to take a photo. When taking a photo, there will be a clicking sound, indicating that the photo is complete.
Video/photo playback
- Short press the MENU key to switch to playback mode, and the playback icon will be displayed in the upper left corner of the screen;
- Short press the “Up” key to select the file downwards, and during video playback, short press to fast forward the video playback;
- Short press the “Up” key to select the file upwards, and during video playback, short press to quickly rewind the video playback;
- Short press the OK key to play the selected video file;
Menu Settings
Long press the menu button to enter the video menu setting state; short press the menu button again to switch to the system menu setting state, and then short press the menu button to exit the setting state. In the outgoing settings item, by Bshort-pressing the “Up” and “Down” keys you can choose to switch up and down in the settings sub-item. Short press the OK key to enter the settings sub-item;
Time setting
Long press the menu key to enter the setting state, short press the menu key to enter the setting menu, select the date time option through the key, Short press the OK key to enter, short press the menu key, and you can switch between year month day/hour/minute/second, by the “Up” and “Down” key to adjust the required value, press OK to confirm the modification, and press the menu key to exit the option.
SETUP MENU
Video resolution:
Video recording resolution FHD 1920 * 1080 HD, 720P 1280 * 720
Loop recording:
Each video recording can be set from 1 minute, 3 minutes, or 5 minutes, when turned off, the recorded video will be automatically overwritten;
Exposure compensation:
Used to adjust the brightness of the image. When the exposure is too high, it will cause the license plate to be too bright. The default is set to 0.
Motion detection:
When not already recording, the dash camera will detect whether there is a moving object and automatically start recording if a moving object is found.
Recording audio:
You can choose whether to record sound or not.
Date Stamp:
When selected, the playback video screen displays a time and date watermark.
G-Sensor
This feature option has high, medium, and low settings. When the vehicle experiences an impact while driving, the image/video file will be locked. (This setting is set to low as default.)
Parking monitoring:
Used when the ignition is off and the battery is charged. When the device detects a vibration it will automatically switch on and record 30 seconds of footage before shutting down again. If the battery is not charged this will not function.
CAMERA SETTINGS MENU
Photo:
Allows you to set single or continuous photo settings with 2, 5, or 0-second timings.
Photo resolution:
The camera resolution can be selected as 1M or 2M.
Continuous shooting function:
When selected to open, 3 consecutive shots can be set.
Image quality:
Can choose high quality, standard, and economy.
Anti-shake:
Option on / off;
Date label:
When selected, the playback displays the time and date.
OPERATION INSTRUCTIONS
Power on and off
Long press the power button to turn on the device, and the power indicator light will light up when the device is turned on; Press and hold the power button to turn off the device after turning it on, and this light will turn off;
Camera mode
Camera mode, short press the OK button to start recording. When recording, the red dot on the screen will start flashing, and the blue indicator light will start flashing, entering the recording mode;
Video/photo playback
Short press the menu button to enter file browsing mode, select the camera file to view and play the videos and images inside;
Menu settings
Long press the menu button in standby mode to access the settings menu; By short pressing the up or down keys, you can cycle up and down through various settings; Select the setting item that needs to be changed, and enter the change by short pressing the OK key;
Exit the settings menu
Short press the menu button to exit the setting state;
TIME AND DATE SETTINGS
- In standby mode, long press the menu key to enter the settings option, short press the up/down keys to select the time and date setting option, short press the OK key to enter, short press the OK key to switch between year/month/day/ hour/minute/second, adjust the desired value by using the up/down keys, short press the OK key to confirm modification and exit the time setting.
- When the machine is connected to the phone’s WiFi, the time will be automatically updated.
NOTE: If the product crashes due to improper operation, you can press the reset button and restart it to restore normal operation.
TROUBLESHOOTING
WARRANTY INFORMATION
Our product is guaranteed to be free from manufacturing defects for 12 Months. If your product becomes defective during this period, Electus Distribution will repair, replace, or refund where a product is faulty; or not fit for the intended purpose. This warranty will not cover modified products; misuse or abuse of the product contrary to user instructions or packaging label; change of mind and normal wear and tear. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and failure does not amount to a major failure. To claim a warranty, please contact the place of purchase. You will need to show a receipt or other proof of purchase. Additional information may be required to process your claim. Any expenses relating to the return of your product to the store will normally have to be paid by you. The benefits to the customer given by this warranty are in addition to other rights and remedies of the Australian Consumer Law about the goods or services to which this warranty relates.
This warranty is provided by:
Electus Distribution
Address 46 Eastern Creek Drive, Eastern Creek NSW 2766
Ph. 1300 738 555
FAQs
Q: What is the maximum capacity of MicroSD card supported?
A: The FHD 3 Channel Dash Camera supports MicroSD cards up to 128GB. It is recommended to use a Class 10 high-speed card.
Q: How can I reset the dash camera if it crashes?
A: You can manually reset the dash camera by using the reset button located on the device.
Q: How do I start and stop recording?
A: In camera mode, short press the record confirmation button to start recording, and short press again to stop. In playback mode, use the same button as the confirmation button.
Documents / Resources
 |
RESPONSE QV3876 3 Channel Dash Camera [pdf] Instruction Manual QV3876 3 Channel Dash Camera, QV3876, 3 Channel Dash Camera, Dash Camera, Camera |
