reolink TrackMix WiFi Camera with Auto Tracking User Guide
reolink TrackMix WiFi Camera with Auto Tracking

TrackMix WiFi with 4K 8MP Ultra HD resolution captures images with great details. Discover more when zooming in. It can distinguish people, vehicles and pets* fromother objects, providing more accurate alerts. Plus, you can talk back via the camera’s built-in mic and speaker.

Specs

Overview

1Infrared LED
2Lens
3Mic
4Daylight Sensor
5Spotlight

Overview

1Micro SD Card Slot
2Reset Button

Setup and Install

Set up the Camera
What’s in the Box
Note: The package content may vary and update with different version andplatforms, please take the below information only for a reference. And the actual package content are subject to the latest information on the product sellingpage. TrackMix WiFi

  • Reolink TrackMix WiFi*1
    Set up
  • 1m Network Cable*1
    Set up
  • Quick Start Guide*1
    Set up
  • Surveillance Sticker*1
    Set up
  • Pack of Screws*1
    Set up
  • Mounting Template *1
    Set up
  • 4.5m Power Extension Cable *1
    Set up
  • Power Adapter 2V/2A*1
    Set up
  • Waterproof Lid *1
    Set up

Set up the Camera on the App

There are two methods to do the initial setup of the camera:

  1. with a Wi-Fi connection;
  2. with a network cable connection.
    1. With Wi-Fi Connection

Step 1. Tap the icon in the top right corner to add the camera.
Corner to add the camera

Step 2. Scan the QR code on the camera.
Scan the QR code

Step 3. Tap Choose Wi-Fi Connection to configure the Wi-Fi settings.
Choose Wi-Fi Connection

Step 4. After you hear the voice prompts from the camera, tick “I have heardth evoice played by the camera“ and tap Next
Next view

Step 5. Select a WiFi network, enter the WiFi password, and tap Next.
Next view

Step 6. Scan the QR code on the app with the camera lens. Tap Scan Now. The QR code will be generated and displayed on your phone. Please hold your phone in front of the camera at a distance of about 20 cm(8inches) and have the phone face the camera lens to let the camera scan the QRcode.
After you hear the beep sound, tick “I have heard a beep sound fromthe camera” and tap Next
Scan Now

Step 7. After you hear a voice prompt “Connection to the router succeeded” fromthe camera, tick “I have heard the voice prompt” and tap Next
Connection

Step 8. Create a login password and name your camera.
Create a login password

Step 9. Initialization finished. Tap Finish, and you can start live viewing now.
Finish

To do the initial setup, please power on the camera with the DC adapter, connect the camera to your router’s LAN port with an Ethernet cable, and followthe steps
below.

Step 1. If your phone, the camera, and the router are on the same network andyou’ve enabled the Add Device Automatically option in the App Settings, youcan tap and select this device on the Devices page and skip to Step 3.
Add Device Automatically
Add Device Automatically

Otherwise, you can tap the icon in the top right corner and scan the QRcodeon the camera to add the camera
Scan the QR code

Step 2. Tap Choose Network Cable Connection. Please make sure the camera is connected in the correct way, as shown in thediagram, and then tap Access the Camera
Choose Network Cable Connection

Step 3. Create a device password and name the device.
Create a device password and name

Step 4. Select the WiFi network that you want to join, enter the password of theWiFi network, and tap Save to save the configuration
Configuration

Step 5. Initialization finished. Tap Finish, and you can start live viewing now.
Finish

Install the Camera

Following the excitement of setting up your TrackMix, you will face up the installation of the camera. So we are here to help you with guides on howto mount the TrackMix camera on the wall or the ceiling. It’s up to you.

Mount the Camera on the Wall

Step 1. Stick the mounting hole template on the wall and drill holes correspondingly.
Step 2. Screw the mount base to the wall using the screws included in the  package.
Step 3. You may control the camera to pan and tilt via Reolink App or Client toadjust the camera’s direction.
Install the Camera

Note: If you install the camera on a pretty hard surface such as drywall, use thedrywall anchors included in the package.

Mount the Camera on the Ceiling

Step 1. Stick the mounting hole template on the ceiling and drill holes correspondingly.
Step 2. Install the mount base to the wall using the screws included in the package.
Step 3. Adjust the camera’s direction by controlling the camera to pan and tilt viathe Reolink App or Client.
Install the Camera

Note: Use the drywall anchors included in the package if needed.

Documents / Resources

reolink TrackMix WiFi Camera with Auto Tracking [pdf] User Guide
TrackMix WiFi Camera with Auto Tracking, TrackMix, WiFi Camera with Auto Tracking, Auto Tracking, Tracking

References

Leave a comment

Your email address will not be published. Required fields are marked *