REFLECT INSIDE
what’s in the box
Orb
Cable
Dust Bag
Quickguide
SETUP
download the Reflect app
follow the instructions there to set up your Orb
Charge your Reflect Orb
to complete your first setup, you must plug your Orb into an electircal outlet to charge it, using the cable that came with it
Turning your Reflect Orb On & Off
Your Orb is always on – to use it just place your hands on the electrodes. If you even need to turn it off completely, push the button at the bottom for 15 seconds. To turn it back on, do the same and wait for the light pattern that indicates your Reflect is on
USING REFLECT
Sit comfortably
you can use a meditation pillow or just sit on your favorite couch – wherever you feel good.
Hold your Reflect Orb
Make sure your fingers are resting on the electrodes correctly without pressing hard
Turning your Reflect Orb On & Off
Your Orb is always on – to use it just place your hands on the electrodes. If you even need to turn it off completely, push the button at the bottom for 15 seconds. To turn it back on, do the same and wait for the light pattern that indicates your Reflect is on
HOW TO USE YOUR REFLECT
Off | No light, doesn’t wake up when you put your hands on it | Push button at bottom for 15 seconds until you see [light pattern TBD] |
Turning On | Light pattern TBD | Push button at bottom for 15 seconds until you see [light pattern TBD] |
Charging | A moving ring of red light until fully charged | Plug in the device to an electrical outlet using the accompanying cable |
Charged and ready to use | No light | Unplug from charger |
Session Start | Pulsing white light | Hold your Reflect orb with your fingers on the electrodes |
During Session | Light will change according to physiological signals | See the light scale on the next page to understand what the lights mean |
your path to wellbeing
Documents / Resources
![]() |
reflect 2A2HYREFLECTORB5 Digram Mapping [pdf] User Guide REFLECTORB5, 2A2HY-REFLECTORB5, 2A2HYREFLECTORB5, 2A2HYREFLECTORB5 Digram Mapping, 2A2HYREFLECTORB5, Digram Mapping |