Razor W15128785015 16 Controller Replacement
Specifications
- Product Name: Rambler 16 Controller Replacement
- Part Number: W15128785015
Required Tools: (Not included)
- A. Phillips screwdriver
Step 1: Remove Battery Cover
Using a Phillips screwdriver, remove seven (7) screws from the side of the battery cover with the power switch.
Step 2: Remove Battery Cover
Remove four (4) screws, two (2) at the front and two (2) at the back of the battery cover. Pull the cover out. Be careful not to damage the wires.
Step 3: Disconnect Connectors
Disconnect all the connectors from the controller.
Step 4: Remove Controller
Using a Phillips screwdriver, remove the two (2) screws that hold the controller onto the battery bracket.
Step 5: Reconnect Controller Wires
When re-connecting the controller to the power switch, make sure you connect the black wire to the gold-colored prong, the red wire to the middle silver-colored prong, and the yellow wire to the remaining silver-colored prong.
Step 6: Reassemble
Reverse the steps.
ATTENTION
Charge the battery 12 hours before using.
FAQs
Q: What should I do if I encounter difficulties during the replacement procedure?
A: For assistance, visit our website at www.razor.com or call toll-free at 866-467-2967 Monday – Friday between 8:00 am – 5:00pm Pacific Time.
Need Help?
Visit our website at www.razor.com or call toll-free at 866-467-2967
Monday – Friday 8:00 am – 5:00 pm Pacific Time.
Documents / Resources
 |
Razor W15128785015 16 Controller Replacement [pdf] User Guide W15128785015 16 Controller Replacement, W15128785015, 16 Controller Replacement, Controller Replacement, Replacement |
