RZ03-03390 Huntsman Mini Keyboard
FIRMWARE INSTALLATION INSTRUCTIONS
RAZER HUNTSMAN MINI FIRMWARE UPDATER GUIDE
APPLICABLE MODEL NUMBERS
DRIVER NAME AND VERSION
Razer Huntsman Mini Updater v1.01.0021
Download Link: http://rzr.to/BzKoq
- Fixed an issue where the device sometimes stops working after a restart or waking up from sleep.
- Make sure your system is plugged into a wall outlet and not just running on battery before proceeding.
- Save any open documents on your computer and close all other programs before attempting the update.
- Download the firmware from the link above.
Note: It is recommended to download and install the latest firmware version.
- Once the file is ready, follow the installation steps below.
1. Run the updater.
2. You may be prompted to confirm changes on your device by the User Account Control. Click “Yes” to confirm these changes.
3. Click “NEXT” to proceed. The installer will close all running Razer applications if you have not done so.
4. Connect the device to the computer and then click “UPDATE”.
5. Wait until the update process is complete. Do not interrupt. 6. When the update is complete, click “CLOSE”.
FOR GAMERS. BY GAMERS.™
Documents / Resources
|RAZER RZ03-03390 Huntsman Mini Keyboard [pdf] Installation Guide|
RZ03-03390, Huntsman Mini Keyboard