Remove and re-attach Razer BlackShark V2 ear cushions
Removal and reattachment of the ear cushions of your Razer BlackShark V2 must be done properly to prevent any damage to its parts.
Before we start with the removal and reattachment process of the ear cushions, it is good to know the parts that we will be dealing with.
There is a total of eight snap joints and two circular ribs on the ear cushion assembly, while the headset ear cup has eight interlocking holders and two guide bosses.
To properly remove the ear cushions, follow these steps:
- Using a flat head screwdriver, ply open the first lower bottom joint.
- Pull up the cushion assembly at the leatherette region and detach each snap joint.
- After detaching all snap joints, take out the cushion assembly.
To properly reattach the ear cushions, follow these steps:
- Align the circular ribs to the guide bosses.
- Snap onto each corresponding interlocking holder by pressing on top of the leatherette. You should hear a clear clicking sound to ensure its proper attachment.
