B2-B2BCT, B2-BBRAC Boost Static Back To Back Frame
“
Specifications:
- Column: 4 pcs
- Side Bracket: 4 pcs
- ST4x20 Bolts: 40 pcs
- Rubber Pad: 24 pcs
- Bolts M6x12: 8 pcs
- Top Frame-1: 2 pcs
- Centre Rails: 4 pcs
- Top Frame-2: 2 pcs
- Screen Brackets: 4 pcs
- Bolts M6x10: 14 pcs
- Connected Beam: 2 pcs
- Centre Bracket: 2 pcs
- Allen Wrench(6mm): 1 pc
- Allen Wrench(4mm): 1 pc
- Cable Tie: 10 pcs
Product Usage Instructions:
Step 1: Adjusting Top Frame
Loosen the pre-installed bolts and adjust the length of the top
frame to match the size of the table top.
Step 2: Attaching Column and Side Bracket
Insert the column into the top frame and fix it with 4 screws
M6x12. Place the side bracket on the top frame and tighten the
bolts.
Step 3: Installing Screen Brackets
Install the screen brackets using 8 bolts M6x10.
Step 4: Connecting Beam and Top Frame
Insert the connected beam and tighten the pre-installed
bolts.
Step 5: Mounting Tabletop
Mount the tabletop and fix it with 26 screws ST4x20. Also, fix
the centre bracket with 2 screws M6x10.
Step 6: Cable Tray Installation
Fix the cable tray to Back to Back desk frame using 8 screws
M6x10.
Screen Panel Installation (Shush30 Privacy Screen)
Step 1: Insert the tapped plates to the screen
panel.
Step 2: Install the screen brackets to the
Shush30 Extrusion with screws M5x6.
Step 3: Fix the screen brackets to the desk
frame with screws M6x10.
Eco Panel Screen Installation (900mm H Eco Panel)
Step 1: Install the screen brackets with screws
M6x10. Ensure correct bracket direction.
Step 2: Place the EPS panel on the screen
brackets. Drill holes in Eco Panel Screen in line with back to back
screen bracket holes. Secure with double-ended bolts M5*32mm and
Allen key.
Frequently Asked Questions (FAQ):
Q: How many rubber pads are included in the package?
A: There are a total of 24 rubber pads included in the
package.
Q: What size bolts are used for mounting the tabletop?
A: The tabletop is mounted using 26 screws ST4x20.
Q: How many Centre Brackets are required for assembly?
A: Two Centre Brackets are required for assembly.
“`
Boost Static Back To Back Frame Instruction Manual
1
Component parts
NO. Component Name
PCS
NO. Component Name
PCS
1
Column
4
9
Screen brackets
4
2
Side Bracket
4
10 Bolts M6x10
14
3
ST4x20
40
11 Connected beam
2
4
Rubber pad
24
12 Centre bracket
2
5
Bolts M6x12
8
13 Allen Wrench(6mm)
1
6
Top frame -1
2
14 Allen Wrench(4mm)
1
7
Centre rails
4
15 Cable Tie
10
8
Top frame-2
2
2
Assembly Instructions
Step 1 Loosen the pre-installed bolts and Adjust the length of the top frame to match the size of the table top.
Step 2 Inset the column to the top frame,fix lifting column with 4pcs screws M6x12.
3
Step 3 Place the side bracket on the top frame and tighten the bolts.
Step 4 Install the screen brackets with 8 PCS M6x10 Bolts
4
Step 5 Insert the connected beam and tighten the pre-installed bolts
Step 6 Mount the tabletop and fix it with 26 pcs screws ST4x20; Fix the centre bracket with 2 pcs screws M6x10
5
Cable tray installation – Fix the cable tray(B2-B2BCT ) to Back to back desk frame with 8 pcs M6x10 screws.
6
Screen panel installation ( Shush30 Privacy Screen ) Step 1 – Insert the tapped plates to the screen panel ( plates can be found in B2-BBRAC carton )
Step 2 – Install the screen brackets ( B2-BBRAC )to the Shush30 Extrusion with 8 pcs M5x6 screws.
7
Step 3 – Fix the screen brackets ( B2-BBRAC ) to the desk frame with 8 pcs M6x10 screws.
8
EPS ( 900mm H Eco Panel ) Screen panel installation Step 1 – Install the screen brackets(B2-BBRAC) with 8 PCS M6x10 Screws The brackets direction as photos display.
Step 2 – Place the EPS panel on the screen brackets – Using a 6mm drill bit ( not included ), drill out holes in Eco Panel Screen in line with back to back screen bracket holes ( Note: Carbide Drill Bits Work Best For PET panel ) – Place 8 x Double Ended Bolts M5* 32mm – 6mm through screen bracket ( B2-BBRAC ) holes and the holes you have created in the Eco Panel Screen. Tighten double ended bolt with Allen key.
9
Documents / Resources
 |
Rapidline B2-B2BCT, B2-BBRAC Boost Static Back To Back Frame [pdf] Instruction Manual B2-B2BCT, B2-BBRAC, B2-B2BCT B2-BBRAC Boost Static Back To Back Frame, B2-B2BCT B2-BBRAC, Boost Static Back To Back Frame, Static Back To Back Frame, Back To Back Frame, Back Frame, Frame |