Radioddity CE-19 Data Interface Extension Unit
Specifications:
- Product Name: CE-19 Data Interface Extension Unit
- Compatibility: X5105 or G90
- Interfaces: MINI-DIN8 to 3.5mm stereo socket, MINI-DIN6 for
XPA125 interface
Product Usage Instructions:
Interface Distribution:
Refer to Figure 1 in the manual for the interface distributionon the board.
Interface Description:
- PTT CON-: PTT signal / BAND signal output
port, isolated from the host for low trigger linkage. - 6PIN-MINIDIN-: XPA125 dedicated
interface. - AF CON-: Audio input / output port. Direct
audio output after demodulation, no filter. - DATA CON-: Data output port with active filter
in the machine. Output signal from both terminals are the
same.
The extended ports have the same definitions as the
corresponding ports of the ACC port of the X5105 host. Refer to the
X5105 manual for details.
For amateur radio data communication, connect audio input /
output to the AF CON interface.
XieGu Radio
FAQ:
Q: What is the purpose of the CE-19 Data Interface Extension
Unit?
A: The CE-19 unit extends the ACC port of X5105 or G90 to allow
user access to PC or other data terminals, modems, etc.
Q: How do I connect the CE-19 unit for amateur radio data
communication?
A: Connect the audio input/output to the AF CON interface when
using it for amateur radio data communication.
“`
Introduction
03-CZ1205(Revision20240228)
The CE-19 data interface extension unit is suitable for extending the ACC port of X5105 or G90 to facilitate user access to PC or other data terminals, modems and so on. The expansion unit extends the MINI-DIN8 interface to the commonly used 3.5mm stereo socket and extends the MINI-DIN6 interface for the XPA125 interface independently, which is convenient for users to use. Details are as follows (Take X5105 as an example).
1. The interface distribution on the board is shown in Figure 1:
Figure 1 Switch
Power indicator LED: lighting after connected to the X5105. Launch light: on when the X5105 is transmitting.
2. Interface description
Port definition:
CE-19 PTT output signal by a relay output pins, and X5105 completely isolated, can adapt to different versions of the XPA125, can also be adapted to other brands of amplifiers (low trigger).
On the CE-19’s cover, the terminal definitions for each interface are printed.
Figure 2 Interface distribution
PTT CON-
PTT signal / BAND signal output port, the port PTT signal completely isolated with the
host, providing linkage with the host “low” trigger.
6PIN-MINIDIN-
XPA125 dedicated interface
AF CON-
Audio input / output port. The audio output from this port is directly output after
demodulation, no filter.
DATA CON-
Data output port. The audio output from this port passes through the active filter in the
machine. The two terminals of this port are parallel, the output signal are the same.
The definition of each extended port is the same as that of the corresponding port of the ACC port of the
X5105 host. See the X5105 manual.
The definition of terminal expansion port, please refer to the expansion card surface indication
information.
When used for amateur radio data communication, audio input / output connect the AF CON interface.
XieGu Radio
Documents / Resources
 |
Radioddity CE-19 Data Interface Extension Unit [pdf] User Manual X5105, G90, CE-19 Data Interface Extension Unit, CE-19, Data Interface Extension Unit, Interface Extension Unit, Extension Unit, Unit |
