Qwiizlab MC25 Max USB C Hub with Dual Drive Enclosure
How To Install HDD / SSD
- Remove the lid on the bottom of the product.
- Insert a 2.5-inch SATA HDD or M.2 NVMe SSD into the slots.
- Put the lid back onto the bottom of the product.
Connectivity
Output
- USB3.0 Type A*2
- USB3.1 Type A*1
- USB 3.1 Type C*1
- SD Card Reader*1
- MicroSD Card Reader*1
- M.2 SSD Slot*1
- SATA HDD Slot*1
- DP*1
- HDMI*1
Input
- Host 1
- Host 2
How To Connect
- Must connect from both Host 1 and Host 2 on the rear of the UH25 Max to both of the Thunderbolt 3 ports on the rear of the Mac mini at the same time with two USB-C cables.
- When connecting HDMI (from Mac mini ), HDMI (from the UH25 Max), and DP (from the UH25 Max) at the same time, it does support the extended mode of A-B-B. It does not support the extended mode of A-B-C.
Documents / Resources
 |
Qwiizlab MC25 Max USB C Hub with Dual Drive Enclosure [pdf] User Manual MC25 Max USB C Hub with Dual Drive Enclosure, MC25, Max USB C Hub with Dual Drive Enclosure, USB C Hub with Dual Drive Enclosure, Dual Drive Enclosure, Drive Enclosure |