Quin Technology logo

PM-344-WF
Quick Start Guide

Quin Technology PM-344-WF Label Printer

Printing on a Computer

Quin Technology PM-344-WF Label Printer - Fig 1

Quin Technology PM-344-WF Label Printer - Fig 2

Please follow the sequence of the above picture to operate.

Quin Technology PM-344-WF Label Printer - Fig 3Straightly and smoothly insert label, printer will automatically grab it. Hold Feeder until the blue light flashes 2 times for label calibration.

Quin Technology PM-344-WF Label Printer - Fig 4

Open the link.

Quin Technology PM-344-WF Label Printer - Fig 5Download the corresponding Printer Setting Tool for your computer system.

Quin Technology PM-344-WF Label Printer - Fig 6

Connect your computer and printer via USB cable, select your Wi-Fi and enter the password.

Quin Technology PM-344-WF Label Printer - Fig 7Complete the Wi-Fi network configuration of the printer. Then restart the printer.

Quin Technology PM-344-WF Label Printer - Fig 8

There are 2 devices / 2 ways to send print jobs:

  1. USB via cable;
  2. Wi-Fi via wireless network.

Appendix

1. Chrome Extension Installation
Please add the “Labelife” extension in the Chrome Web Store. Compatible with ChromeOS system computers, MacOS Chrome browser. NOT compatible with Windows Chrome browser.

Quin Technology PM-344-WF Label Printer - Fig 9

2. Application Introduction

Applications Devices Connection
LableifeQuin Technology PM-344-WF Label Printer - Symbol 1 Windows / iMac,
MacBook Air, MacBook Pro
USB / Wi-Fi
Labelife ExtensionQuin Technology PM-344-WF Label Printer - Symbol 2 ChromeOS / iMac,
MacBook Air, MacBook Pro
USB
LabelifeQuin Technology PM-344-WF Label Printer - Symbol 2 Android / iPhone, iPad Wi-Fi

Printing on a Mobile Device

Quin Technology PM-344-WF Label Printer - Fig 10Quin Technology PM-344-WF Label Printer - Fig 11

Please follow the sequence of the above picture to operate.

Quin Technology PM-344-WF Label Printer - Fig 12Straightly and smoothly insert label, printer will automatically grab it. Hold Feeder until the blue light flashes 2 times for label calibration.

Quin Technology PM-344-WF Label Printer - Fig 13

https://www.aimotech.com/labelife/analysis.html

Search Labelife on App Store or Google Play to get the App. Or please scan the QR Code to download the App.

Quin Technology PM-344-WF Label Printer - Fig 14Turn on Bluetooth from phone settings. Configure the Wi-Fi for the printer via Bluetooth in the Labelife app.” Due to the mobile phone system requirements, App needs access to location, so you need to enable GPS and confirm authorization(An-  droid only).

Quin Technology PM-344-WF Label Printer - Fig 15

Select the printer from the list and go for network configuration.

Quin Technology PM-344-WF Label Printer - Fig 16Enter the Wi-Fi password.Complete the Wi-Fi network configuration of the printer.

FCC Warning statement

FCC STATEMENT

  1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
    (1) This device may not cause harmful interference,and (2) This device must accept any interference received, including interference that may cause undesired operation.
  2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica- tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

IC Warning statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’ s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
FCC/ IC Radiation Exposure Statement
This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body

Documents / Resources

Quin Technology PM-344-WF Label Printer [pdf] User Guide
PM-344-WF, PM-344-WF Label Printer, Label Printer, Printer

References

Leave a comment

Your email address will not be published. Required fields are marked *