QuickBOLT 17963, 17660 Black Split Top QB2
Specifications
- Product Name: AHJ CONDENSED PERMIT PACKAGE 2024
- Version: 5
- Compatible with: Asphalt, EPDM, & TPO Roofs
- Patent Number: #8448407
- Manufacturer: A Division of QuickScrews International Corp
Product Usage Instructions
Recommended Materials:
Ensure you have the following materials before installation:
- MFG approved sealant
- L-Foot
- Bolt
Installation Instructions:
- Locate and mark the rafter where the installation will take place.
- Predrill the hole at the marked location.
- (Optional) Fill the predrilled hole with MFG approved sealant.
- (Optional) Place a ring of sealant around the bottom of the L-Foot.
- Insert the Bolt into the L-Foot.
FAQ
- Q: Do I need to use sealant during installation?
- A: While it is optional, using MFG approved sealant is recommended to ensure proper sealing and waterproofing.
- Q: Can this product be used on other types of roofs apart from asphalt, EPDM, and TPO?
- A: This product is specifically designed for use on asphalt, EPDM, and TPO roofs. It is not recommended for other roof types.
RECOMMENDED MATERIALS
- Tools to locate and mark rafter
- Drill with a 15/64” drill bit
- MFG approved sealant (optional)
- 1/2” Nut Setter
INSTALLATION INSTRUCTIONS
- Locate and mark the rafter
- Predrill the hole
- Optional: Fill the predrilled hole with MFG approved sealant
- Optional: Place a ring of sealant around the bottom of the Microflashing® washer
- Place the Microflashing®
- Insert the Bolt into the L-Foot
- Drive the Bolt until the Microflashing® is compressed
To compress Microflashing® properly with QB2 use a 150 minimum torque lbs/inch The Bolt will compress the Microflashing® and when fully compressed the L-Foot will not rotate.
Documents / Resources
 |
QuickBOLT 17963, 17660 Black Split Top QB2 [pdf] Installation Guide 17963, 17660, 17963 17660 Black Split Top QB2, 17963 17660, Black Split Top QB2, Split Top QB2, Top QB2, QB2 |
