AHJ CONDENSED PERMIT PACKAGE
2023
17667SS
17664, 17666, 17666NT
LOW PROFILE QB1 WITH 3” MICROFLASHING®
FOR ASPHALT, EPDM, & TPO ROOFS

Version 8
PATENT # 8448407

RECOMMENDED MATERIALS

• Rafter locator
• Chalk or a crayon
• Drill with a 3/16” drill bit
• MFG approved sealant
• M6 deep socket hex driver
• 1/2” wrench

INSTALLATION INSTRUCTIONS

1. Locate the rafter and predrill the hole
2. Fill the predrilled hole with MFG approved sealant
3. Place a ring of sealant around the bottom of the Microflashing® washer
4. Place the Microflashing® and drive the bolt until it compresses
5. Insert the L-Foot
6. Insert the nut and tighten until secure

To compress Microflashing® properly with QuickBOLT use a 125 minimum torque lbs/inch

Documents / Resources

QuickBOLT 17666 Low Profile Qb1 With 3 Inch Microflashing [pdf] User Guide 17666 Low Profile Qb1 With 3 Inch Microflashing, 17666, Low Profile Qb1 With 3 Inch Microflashing, Qb1 With 3 Inch Microflashing, 3 Inch Microflashing, Microflashing

References

• User Manual