User Guide for QuickBOLT models including: 17666 Low Profile Qb1 With 3 Inch Microflashing, 17666, Low Profile Qb1 With 3 Inch Microflashing, Qb1 With 3 Inch Microflashing, 3 Inch Microflashing, Microflashing

View Installation Manual

QuickBOLT 17867 5 1/4-inch Multi Roof Mount QB1 Kit w/ 4-inch Microflashing & Stainless Steel Low Profile Black Split Top L-Foot

QuickBOLT 17664 5/16 x 5-1/4-inch 304 Stainless Steel Low Profile QuickBOLT

• Google Docs
• Google Drive
• Download [pdf]



File Info : application/pdf, 2 Pages, 312.95KB

Document Document

AHJ CONDENSED PERMIT PACKAGE 2023

Version 8

17667SS 17664, 17666, 17666NT
LOW PROFILE QB1 WITH 3" MICROFLASHING®
FOR ASPHALT, EPDM, & TPO ROOFS
PATENT # 8448407

A DIVISION OF QUICKSCREWS INTERNATIONAL CORP

INSTALL INSTRUCTIONS

1 2 3 4 5 6
8

RECOMMENDED MATERIALS
· Rafter locator · Chalk or a crayon · Drill with a 3/16" drill bit · MFG approved sealant · M6 deep socket hex driver · 1/2" wrench
INSTALLATION INSTRUCTIONS
1. Locate the rafter and predrill the hole 2. Fill the predrilled hole with MFG approved sealant 3. Place a ring of sealant around the bottom of the
Microflashing® washer 4. Place the Microflashing® and drive the bolt until it compresses 5. Insert the L-Foot 6. Insert the nut and tighten until secure
To compress Microflashing® properly with QuickBOLT use a 125 minimum torque lbs/inch