QLIGHT ST8 LED Steady Flashing Tower Lights User Manual
QLIGHT ST8 LED Steady Flashing Tower Lights

Thank you for purchasing Qlight’s products. Please read this user manual carefully prior to installation and operation to ensure safe and correct use.

Contents hide
1 Precautions for Safety
2 Ordering Specifications
3 Product Specifications
4 Dimensions
5 Wiring Instructions
6 Parts Definition
7 How to Change Lens Kit
8 Installation Environment and Protection Rating
9 Mounting Hole Specifications
9.1 Mounting Accessories (Sold Separately)
10 Technical Certification
11 Support
12 Documents / Resources
12.1 References
13 Related Posts

Precautions for Safety

Failure to follow the instructions below may cause a loss of life or serious physical injury.

  1. During wiring or maintenance, please completely turn off the power of the product. (Failure to follow this may lead to an electric shock.)
  2. Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection ratings indicated for each product. (Failure to follow these instructions may cause a fire to the product, electric shock, physical injury, malfunction or damage to the product.)
  3. Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point. (Failure to follow these instructions may lead to fire, electric shock, or product damage.)
  4. Please apply the correct voltage to the product. (Failure to follow these instructions may lead to fire, electric shock, or product damage.)
  5. When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device. (Failure to follow this may cause damage to property, fire, electric shock and loss of life.)

Precautions for Correct Use

Failure to follow the proper instructions may cause damage to property, the product, or malfunction of the product that would void the warranty.

  1. Please remove any objects that can interrupt ventilation around the product.
  2. Please turn off the power of the product immediately if it fails to operate properly.
  3. Carefully wire the product according to each product’s specification.
  4. Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product.
  5. Do not apply excessive force/impact to the product.
  6. Failure to follow any of the instructions above may cause malfunction or damage to the product, fire, and electric shock.

Ordering Specifications

Ordering Instructions
Ordering Instructions
Ordering Instructions
Ordering Instructions

Product Specifications

ST45ML

Model number Layer count Voltage Current Certificate Weight

Color
    AC/DC12V 0.040A Symbols 0.19kg  
  1 AC/DC24V

AC110V

 0.040A

0.024A

 0.19kg 0.25kg R-Red
    AC220V 0.012A 0.25kg  
    AC/DC12V 0.080A 0.21kg  
* ST45ML
* ST45ML-BZ		 2 AC/DC24V

AC110V

 0.080A

0.026A

 0.21kg 0.29kg R-Red

G-Green
ST45ML-WS   AC220V 0.013A 0.29kg  
ST45ML-WM ST45ML-WA*  ST45MLF*
ST45MLF-BZ		  

3

 AC/DC12V AC/DC24V AC110V AC220V 0.120A

0.120A

0.028A

0.014A

 0.25kg 0.25kg 0.34kg 0.34kg R-Red

A-Amber G-Green
ST45MLF-WS ST45MLF-WM

ST45MLF-WA

 4 AC/DC12V AC/DC24V AC110V 0.160A
0.160A
0.031A		 0.30kg 0.30kg 0.38kg R-Red

A-Amber G-Green
    AC220V 0.015A 0.38kg B-Blue
  5 AC/DC12V AC/DC24V AC110V AC220V 0.200A
0.200A
0.033A
0.016A		 0.34kg 0.34kg 0.42kg
0.42kg		 R-Red
A
Amber G-Green B-Blue W-White

ST45L

Model number Layer count Voltage Current Certificate Weight Color
AC/DC12V 0.040A Symbols 0.35kg
1 AC/DC24VAC110V 0.040A0.024A 0.35kg 0.45kg R-Red
AC220V 0.012A 0.45kg
AC/DC12V 0.080A 0.39kg
* ST45L* ST45L-BZ 2 AC/DC24VAC110V 0.080A0.026A 0.39kg 0.49kg R-RedG-Green
ST45L-WS AC220V 0.013A 0.49kg
ST45L-WM ST45L-WA* ST45LF* ST45LF-BZ  3 AC/DC12V AC/DC24V AC110V AC220V 0.120A0.120A0.028A0.014A 0.44kg 0.44kg 0.54kg 0.54kg R-RedA-Amber G-Green
ST45LF-WS ST45LF-WMST45LF-WA  4 AC/DC12V AC/DC24V AC110V 0.160A0.160A0.031A 0.48kg 0.48kg 0.58kg R-RedA-Amber G-Green
AC220V 0.015A 0.58kg B-Blue
  5 AC/DC12V AC/DC24V AC110V AC220V 0.200A0.200A0.033A0.016A 0.52kg 0.52kg 0.62kg 0.62kg R-RedA-Amber G-Green B-Blue W-White

ST56MEL

Model number Layer count Voltage Current Certificate Weight Color
AC/DC12V 0.060A Symbols 0.26kg
1 AC/DC24VAC110V 0.040A0.044A 0.26kg 0.42kg R-Red
AC220V 0.022A 0.42kg
AC/DC12V 0.120A 0.32kg
* ST56MEL* ST56MEL-BZ 2 AC/DC24VAC110V 0.080A0.048A 0.32kg 0.48kg R-RedG-Green
ST56MEL-WS AC220V 0.024A 0.48kg
ST56MEL-WM ST56MEL-WA* ST56MELF* ST56MELF-BZ  3 AC/DC12V AC/DC24V AC110V AC220V 0.180A0.120A0.053A0.026A 0.37kg 0.37kg 0.54kg 0.54kg R-RedA-Amber G-Green
ST56MELF-WS ST56MELF-WMST56MELF-WA  4 AC/DC12V AC/DC24V AC110V 0.240A0.160A0.057A 0.43kg 0.43kg 0.59kg R-RedA-Amber G-Green
AC220V 0.028A 0.59kg B-Blue
  5 AC/DC12V AC/DC24V AC110V AC220V 0.300A0.200A0.062A0.031A 0.49kg 0.49kg 0.65kg 0.65kg R-RedA-Amber G-Green B-Blue W-White

ST56EL

Model number

 Layer count Voltage Current Certificate Weight

Color
    AC/DC12V 0.060A Symbols 0.41kg  
  1 AC/DC24V

AC110V

 0.040A

0.044A

 0.41kg 0.57kg R-Red
    AC220V 0.022A 0.57kg  
    AC/DC12V 0.120A 0.47kg  
*  ST56EL

*  ST56EL-BZ

 2 AC/DC24V

AC110V

 0.080A

0.048A

 0.47kg 0.62kg R-Red

G-Green
ST56EL-WS   AC220V 0.024A 0.62kg  
ST56EL-WM ST56EL-WA

*  ST56ELF

*  ST56ELF-BZ

  

3

 AC/DC12V AC/DC24V AC110V AC220V 0.180A

0.120A

0.053A

0.026A

 0.52kg 0.52kg 0.68kg 0.68kg R-Red

A-Amber G-Green
ST56ELF-WS ST56ELF-WM

ST56ELF-WA

  

4

 AC/DC12V AC/DC24V AC110V 0.240A

0.160A

0.057A

 0.58kg 0.58kg 0.74kg R-Red
A-Amber G-Green
    AC220V 0.028A 0.74kg B-Blue
   

 

5

 AC/DC12V AC/DC24V AC110V AC220V 0.300A

0.200A

0.062A

0.031A

 0.63kg 0.63kg 0.75kg 0.75kg R-Red

A-Amber G-Green B-Blue W-White

ST56ML

Model number

 Layer count Voltage Current Certificate Weight

Color
    AC/DC12V 0.120A Symbols 0.22kg  
  1 AC/DC24V

AC110V

 0.080A

0.048A

 0.22kg 0.45kg R-Red
    AC220V 0.024A 0.45kg  
    AC/DC12V 0.240A 0.30kg  
*  ST56ML

*  ST56ML-BZ

 2 AC/DC24V

AC110V

 0.160A

0.057A

 0.30kg 0.53kg R-Red

G-Green
ST56ML-WS   AC220V 0.028A 0.53kg  
ST56ML-WM ST56ML-WA
*ST56MLF
*ST56MLF-BZ		  

3

 AC/DC12V AC/DC24V AC110V AC220V 0.360A

0.240A

0.066A

0.033A

 0.38kg 0.38kg 0.61kg 0.61kg R-Red

A-Amber G-Green
ST56MLF-WS

ST56MLF-WM ST56MLF-WA

  

4

 AC/DC12V AC/DC24V AC110V 0.480A

0.320A

0.075A

 0.46kg 0.46kg 0.70kg R-Red

A-Amber G-Green
    AC220V 0.037A 0.70kg B-Blue
  5 AC/DC12V AC/DC24V AC110V AC220V 0.600A
0.400A
0.082A
0.041A		 0.54kg 0.54kg 0.78kg 0.78kg R-Red
A-Amber G-Green B-Blue W-White

ST56L

Model number Layer count Voltage Current Certificate Weight Color
AC/DC12V 0.120A Symbols
0.080A0.048A 0.44kg 0.60kg R-Red
AC220V 0.024A 0.60kg
AC/DC12V 0.240A 0.52kg
*  ST56L* ST56L-BZ ST56L-WS ST56L-WM ST56L-WA*  ST56LF* ST56LF-BZ ST56LF-WS ST56LF-WM ST56LF-WA 2 AC/DC24VAC110V AC220V 0.160A0.057A0.028A 0.52kg 0.68kg 0.68kg R-Red G-Green
 3 AC/DC12V AC/DC24V AC110V AC220V 0.360A0.240A0.066A0.033A 0.60kg 0.60kg 0.76kg 0.76kg R-RedA-Amber G-Green
 4 AC/DC12V AC/DC24V AC110V AC220V 0.480A0.320A0.075A0.037A 0.68kg 0.68kg 0.84kg 0.84kg R-RedA-Amber G-Green B-Blue
  5 AC/DC12V AC/DC24V AC110V AC220V 0.600A0.400A0.082A0.041A 0.77kg 0.77kg 0.93kg 0.93kg R-RedA-Amber G-Green B-Blue W-White
  • Models with an asterisk mark (*) have certification.
  • CE compliant : DC12V/24V
  • UL listed : DC24V

ST80MEL

Model number Layer count Voltage Current Certificate Weight Color
AC/DC12V 0.080A Symbols 0.36kg
1 AC/DC24VAC110V 0.040A0.046A 0.36kg 0.59kg R-Red
AC220V 0.023A 0.59kg
AC/DC12V 0.160A 0.45kg
* ST80MEL* ST80MEL-BZ 2 AC/DC24VAC110V 0.080A0.051A 0.45kg 0.68kg R-RedG-Green
ST80MEL-WS AC220V 0.025A 0.68kg
ST80MEL-WM ST80MEL-WA ST80MELFST80MELF-BZ  3 AC/DC12V AC/DC24V AC110V AC220V 0.240A0.120A0.057A0.028A 0.55kg 0.55kg 0.76kg 0.76kg R-RedA-Amber G-Green
ST80MELF-WS AC/DC12V 0.320A 0.64kg R-Red
ST80MELF-WMST80MELF-WA 4 AC/DC24VAC110V 0.160A0.064A 0.64kg 0.87kg A-Amber G-Green
AC220V 0.032A 0.87kg B-Blue
  5 AC/DC12V AC/DC24V AC110V AC220V 0.400A0
.200A0.
071A0.035A		 0.73kg 0.73kg 0.96kg 0.96kg R-RedA-Amber G-Green B-Blue W-White

ST80EL

Model number Layer count Voltage Current Certificate Weight Color
AC/DC12V 0.080A Symbols 0.58kg
1 AC/DC24VAC110V 0.040A0.046A 0.58kg 0.81kg R-Red
AC220V 0.023A 0.81kg
AC/DC12V 0.160A 0.67kg
*  ST80EL* ST80EL-BZ ST80EL-WS ST80EL-WM ST80EL-WA ST80ELF ST80ELF-BZ ST80ELF-WS ST80ELF-WM ST80ELF-WA 2 AC/DC24VAC110V AC220V 0.080A0.051A0.025A 0.67kg 0.91kg 0.91kg R-Red G-Green
 3 AC/DC12V AC/DC24V AC110V AC220V 0.240A0.120A0.057A0.028A 0.77kg 0.77kg 1.00kg 1.00kg R-RedA-Amber G-Green
 4 AC/DC12V AC/DC24V AC110V AC220V 0.320A0.160A0.064A0.032A 0.86kg 0.86kg 1.09kg 1.09kg R-RedA-Amber G-Green B-Blue
  5 AC/DC12V AC/DC24V AC110V AC220V 0.400A0.200A0.071A0.035A 0.95kg 0.95kg 1.19kg 1.19kg R-RedA-Amber G-Green B-Blue W-White

ST80ML

Model number Layer count Voltage Current Certificate Weight Color
AC/DC12V 0.160A Symbols 0.40kg
1 AC/DC24VAC110V 0.080A0.055A 0.40kg 0.64kg R-Red
AC220V 0.027A 0.64kg
AC/DC12V 0.320A 0.54kg
* ST80ML* ST80ML-BZ 2 AC/DC24VAC110V 0.160A0.064A 0.54kg 0.78kg R-RedG-Green
ST80ML-WS AC220V 0.032A 0.78kg
ST80ML-WM ST80ML-WA ST80MLFST80MLF-BZ  3 AC/DC12V AC/DC24V AC110V AC220V 0.480A0.240A0.073A0.036A 0.68kg 0.68kg 0.92kg 0.92kg R-RedA-Amber G-Green
ST80MLF-WS AC/DC12V 0.640A 0.83kg R-Red
ST80MLF-WMST80MLF-WA 4 AC/DC24VAC110V 0.320A0.084A 0.83kg 1.06kg A-Amber G-Green
AC220V 0.042A 1.06kg B-Blue
  5 AC/DC12V AC/DC24V AC110V AC220V 0.800A0
400A0
093A0
.046A		 0.97kg 0.97kg 1.20kg 1.20kg R-RedA-Amber G-Green B-Blue W-White

ST80L

Model number Layer count Voltage Current Certificate Weight Color
AC/DC12V 0.160A Symbols 0.62kg
1 AC/DC24VAC110V 0.080A0.055A 0.62kg 0.86kg R-Red
AC220V 0.027A 0.86kg
AC/DC12V 0.320A 0.77kg
*  ST80L* ST80L-BZ ST80L-WS ST80L-WM ST80L-WA ST80LF ST80LF-BZ ST80LF-WS ST80LF-WM ST80LF-WA 2 AC/DC24VAC110V AC220V 0.160A0.064A0.032A 0.77kg 1.00kg 1.00kg R-Red G-Green
 3 AC/DC12V AC/DC24V AC110V AC220V 0.480A0.240A0.073A0.036A 0.91kg 0.91kg 1.14kg 1.14kg R-RedA-Amber G-Green
 4 AC/DC12V AC/DC24V AC110V AC220V 0.640A0.320A0.084A0.042A 1.05kg 1.05kg 1.29kg 1.29kg R-RedA-Amber G-Green B-Blue
  5 AC/DC12V AC/DC24V AC110V AC220V 0.800A0.400A0.093A0.046A 1.19kg 1.19kg 1.14kg 1.14kg R-RedA-Amber G-Green B-Blue W-White
  • Models with an asterisk mark (*) have certification.
  • CE compliant : DC12V/24V
  • UL listed : DC24V

Signal/ Audible line current(Per each layer)

Model number Current AC/DC12V AC/DC24V AC110V AC220V
ST45ML ST45L Signal line current 0.040A 0.040A 0.024A 0.012A
Audible line current 0.016A 0.031A 0.027A 0.030A
ST56MEL ST56EL Signal line current 0.060A 0.040A 0.044A 0.022A
Audible line current 0.016A 0.031A 0.027A 0.030A
ST56ML ST56L Signal line current 0.120A 0.080A 0.048A 0.024A
Audible line current 0.016A 0.031A 0.027A 0.030A
ST80MEL ST80EL Signal line current 0.080A 0.040A 0.046A 0.023A
Audible line current 0.016A 0.031A 0.027A 0.030A
ST80ML ST80L Signal line current 0.160A 0.080A 0.055A 0.027A
Audible line current 0.016A 0.031A 0.027A 0.030A

Dimensions

ST45ML/ ST45L
Dimensions
Dimensions
Dimensions
Dimensions
Dimensions
Dimensions
Dimensions
Dimensions
Dimensions
Dimensions
Dimensions

Wiring Instructions

Wiring using external contact

In case of wiring with external contacts, refer to the wiring diagrams below according to your product’s type and voltage setting.

 Wiring diagrams  

Wiring diagrams
DC Steady Wiring diagrams AC Steady Wiring diagrams
ST45ML ST45L ST56MEL ST56ML ST56EL ST56L ST80MEL ST80ML ST80EL ST80L ST45ML ST45L ST56MEL ST56ML ST56EL ST56L ST80MEL ST80ML ST80EL ST80L
DC Steady/Flashing Wiring diagrams AC Steady/Flashing Wiring diagrams
ST45MLF ST45LF ST56MELF ST56MLF ST56ELF ST56LF ST80MELF ST80MLF ST80ELF ST80LF ST45MLF ST45LF ST56MELF ST56MLF ST56ELF ST56LF ST80MELF ST80MLF ST80ELF ST80LF
DC/AC Steady Built-in Signal Sound Wiring diagrams
ST□□M(E)L – WS/ WM/ WA type same wiring instruction
ST□□(E)L – WS/ WM/ WA type same wiring instruction
ST□□ L
Lens diameter 45(45mm) : ST45L
56(56mm) : ST56L
80(80mm) : ST80L		 DC/AC Steady/Flashing Built-in Signal Sound Wiring diagrams
ST□□M(E)LF – WS/ WM/ WA type same wiring instruction
ST□□(E)LF – WS/ WM/ WA type same wiring instruction
ST□□   LF
Lens diameter 45(45mm) : ST45LF
56(56mm) : ST56LF
80(80mm) : ST80LF
  • DC steady type cable specification : External power/ signal line – UL1007 AWG22(0.3sq) 400mm.
  • AC steady, AC/DC steady/flashing type cable specification : External power line – UL1015 AWG18(0.75sq) × 2C 400mm, External signal line – UL1007 AWG22(0.3sq) 400mm

Wiring using transistor

When using a transistor, please choose between the NPN or PNP type transistor which best matches the voltage and product type, then connect them correctly according to the wiring diagrams below.

 

Wiring diagrams
DC Steady Wiring diagrams
ST45ML ST45L ST56MEL ST56ML ST56EL ST56L ST80MEL ST80ML ST80EL ST80L
DC Steady/Flashing Wiring diagrams AC Steady/Flashing Wiring diagrams
ST45MLF ST45LF ST56MELF ST56MLF ST56ELF ST56LF ST80MELF ST80MLF ST80ELF ST80LF ST45MLF ST45LF ST56MELF ST56MLF ST56ELF ST56LF ST80MELF ST80MLF ST80ELF ST80LF
DC/AC Steady Built-in Signal Sound Wiring diagrams
  • ST□□M(E)L – WS/ WM/ WA type same wiring instruction
  • ST□□(E)L – WS/ WM/ WA type same wiring instruction
  • ST□□ L
    Lens diameter 45(45mm) : ST45L
    56(56mm) : ST56L
    80(80mm) : ST80L
 DC/AC Steady/Flashing Built-in Signal Sound Wiring diagrams
  • ST□□M(E)LF – WS/ WM/ WA type same wiring instruction
  • ST□□(E)LF – WS/ WM/ WA type same wiring instruction
  • ST□□ LF
    Lens diameter 45(45mm) : ST45LF
    56(56mm) : ST56LF
    80(80mm) : ST80LF
ST45ML ST45L ST56MEL ST56ML ST56EL ST56L ST80MEL ST80ML ST80EL ST80L ST45MLF ST45LF ST56MELF ST56MLF ST56ELF ST56LF ST80MELF ST80MLF ST80ELF ST80LF
  • DC steady type cable specification : External power/ signal line – UL1007 AWG22(0.3sq) 400mm.
  • AC steady, AC/DC steady/flashing type cable specification : External power line – UL1015 AWG18(0.75sq) × 2C 400mm, External signal line – UL1007 AWG22(0.3sq) 400mm

Parts Definition

Parts Definition

How to Change Lens Kit

Change Lens Kit

  • When rearranging or replacing the lens kits, please be aware of the contact point ① and the connector pin ② marked in the diagram on the left.
  • Press down to assemble the lens kits while making sure that connector pin ② and connector ③ aligns correctly.
  • Please make sure that the rubber spacer placed on the top of each ② lens kit is tightly secured to the bottom of the other lens kit.

Caution when dealing with lens kit

  • Lens kits are connected with connector pins each other. Bad connection may be experienced when the connector pins are touched with a foreign substance.
  • If the lens kits are not turned on or not flashed after lens kits replacement, please make sure status of lens kit connection.

Installation Environment and Protection Rating

  • This product is designed for indoor use with protection rating of IP44(standard type) or IP23(buzzer type).
  • If the product is installed in locations that subject it to excessive dust or water other than the designated IP protection rating indicated(IP44), it may cause malfunction or damage to the product.
  • For further information, please visit our website(www.qlight.com).

Mounting Hole Specifications

ST45ML/ ST56MEL/ ST56ML/ ST80MEL/ ST80ML- Direct Mounting Type Model

  1. Machine holes on the mounting surface referring to the diagram below.
    Mounting Hole
  2. First, remove the flange nuts from bolts and place the product through the mounting surface holes.
  3. Fasten the flange nuts on the opposite side of the mounting surface until the product is tightened securely

2 Sound Buzzer Type

  • Buzzer type model with 2 different sounds of long beeping sound and short beeping sound is available upon request.
  • Lens Kits supplied by AC Type power (same wiring as DC Steady type product)
  • Customized pole length(ST45L/ ST56EL/ ST56L/ ST80EL/ ST80L)
Mounting Accessories (Sold Separately)

Please refer to the dimensions below for installation of mounting brackets

ST45ML/ ST56MEL/ ST56ML/ ST80MEL/ ST80ML – Direct Mounting Type Model

  Dimensions
ST45 series ST56 series Dimensions
TWS45		 Dimensions
TWA45
ST80 series Dimensions
TWS80		 Dimensions
TWA80

ST45L/ ST56EL/ ST56L – Pole Mounting Type Model

ST45 series ST56 series
Dimensions
Dimensions
Dimensions
Dimensions
Dimensions
Dimensions
Dimensions
Dimensions
Dimensions

ST80 series
Dimensions
Dimensions

Technical Certification

  • Qlight products are designed to meet strict quality and technical standards. Thus, the Qlight brand is widely recognized for its high quality and technical innovations from leading institutions around the world.

Symbols
ISO International Organization for Standardization
Qlight quality assurance systems have been certified by ISO by applying the ISO 90001-2018 KS Q ISO 9001:2009 regulation.

Symbols
ATEX The European Regulatory
Framework or Manufacture, Installation and Use of Equip- ment in Explosive Atmospheres Qlight’s explosion proof products comply with ATEX Directives 94/9/EC.

Symbols
KCs Explosion Proof Device Safety Certification System The  safety  performance  of  machines  and Technical capability and production system have  standards.

Symbols
TIIS Japan Explosion-proof certification
TIIS is a Japanes explosion proof test and certification system accordance with the Ministry of Health, Labour and Welfare Notice and the explosion proof guidelines for factory electrical equipment. Qlight’s explosion proof products hasve been tested and certified by TIIS.

Symbols
Light’s design and quality assurance system has 2Ia been certified by the China Classification Society. CCS China Classification Society

Symbols
LR Lloyd’s
Register light’s design and quality assurance system has been certified from Lloyd’s Register.

Symbols
UL Underwriters Laboratories
Qlight’s design and quality assurance system has been certified from UL to ensure the stability of consumption goods and to protect consumers.

Symbols
CCCF China certification Center for  Security & Protection
Qlight has passed the rigorous examination process of “Passing Fire Protection Products Centering” In order to sell fire-fighting products such as fire alarm equipment to Chinese market.

Symbols
CCC China Compulsory Certificate
Qlight’s has obtained CCC which guarantees safety, protection against fraud, environment, etc.

Symbols
RoHS2 Restriction of Hazardous Substances Directive
Qlight c omplies with the Restriction of Hazardous Substances Directive by limiting its use of hazardous materials.

For your safety

Specification and dimensions listed in this catalogue subject to change without notice for product quality improvement.
The newest product information is available on our website.(www.qlight.com)
Please read the instruction manual attached to the product carefully before installation and use.

Support

Qlight Co., Ltd. www.qlight.com
trade@qlight.com
Head Office
Suite #1510, STX-V Tower, 128 Gasan digital 1-ro, Geumcheon-gu, Seoul, Korea
Tel. +82-2-2679-6152(Toll free. +82-80-328-2222) Fax. +82-2-2679-6154
Factory
185-25, Mukbang-ro, Sangdong-myeon, Gimhae-si, Gyeongsangnamdo, Korea Tel. +82-55-328-1111(Toll free. +82-80-328-1111)
Qlight OverSEAs Sales Dept
704 Nakdong-daero, Sasang-gu, Busan, Korea(Eomgung-Dong) Tel : +82-51-620-4100
Qlight Public Relations & Marketing Team Office
704 Nakdong-daero, Sasang-gu, Busan, Korea(Eomgung-Dong) Tel. +82-51-245-0017

 

Documents / Resources

QLIGHT ST8 LED Steady Flashing Tower Lights [pdf] User Manual
ST45, ST56, ST8, ST8 LED Steady Flashing Tower Lights, LED Steady Flashing Tower Lights, Flashing Tower Lights, Tower Lights

References

Related Posts

Leave a comment

Your email address will not be published. Required fields are marked *