Why does my Hunter X-Core system restart the watering cycle immediately after finishing?
If your Hunter X-Core controller starts a new watering cycle immediately after completing one, it is most likely because you have programmed multiple Start…
Manuals+ Q&A
X-core questions & answers
Browse answered questions about X-core, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
How do I program my Hunter X-Core controller?
To program your Hunter X-Core controller, please follow these steps: 1. Start by turning the dial to the "Set Date/Time" position. 2. Use the…
How do I program my Hunter X-Core irrigation controller?
To program your Hunter X-Core irrigation controller, please follow these steps: 1. Press the "Program" button on the controller. This will take you to…
How do I program my Hunter X-core controller?
To program your Hunter X-core controller, follow these steps: 1. **Select Program:** Press the "Program" button to select the program you want to set…
How do I troubleshoot if my Hunter X-Core irrigation controller is not turning on the zones as programmed?
If your Hunter X-Core irrigation controller is not turning on the zones as programmed, you can follow these troubleshooting steps: 1. **Check Power Supply:**…