How do I turn off my Skullcandy Uproar Wireless headphones if they are not responding?
To turn off your Skullcandy Uproar Wireless headphones, you must press and hold the Main Function Button (MFB) until the LED indicator turns RED…
Manuals+ Q&A
Wireless questions & answers
Browse answered questions about Wireless, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Newest questionsOne of my BD&M Wireless Bluetooth Earbuds, Model: BDNM-E7S, Bluetooth Version: 5.0, is not holding a charge as long as the other. I purchased them in December 2023 on Amazon. It now lasts only 1.5 hours and the other close to 4 hours. I have cleaned all contacts and swapped charging ports to no avail. Am I missing something?
It sounds like you've already taken some good troubleshooting steps by cleaning the contacts and swapping charging ports. Since one earbud is significantly underperforming…
Why do my TWS earbuds show a green light instead of red or blue and won't turn on?
Based on the TWS Wireless Bluetooth Earbuds manual, the standard light indicators are RED for charging and BLUE for power on/pairing. A green light…
Can I purchase a replacement charging case for my TWS earphones if the setup button is broken?
Whether you can purchase a replacement charging case depends on the specific manufacturer or vendor of your "AirPod Look-a-Like" earphones, as "TWS" is a…
Why do my TWS earbuds beep during a conversation and how can I turn it off?
A beeping sound during a conversation on TWS earbuds is most commonly a notification for a low battery. According to the manual, when the…
Why is one of my TWS earbuds not charging even after cleaning?
If one of your earbuds is not charging after cleaning the contacts, you may need to perform a factory reset to resolve potential software…
Why are my TWS earbuds not charging past 40%?
If your TWS earbuds are not charging fully, try the following troubleshooting steps: Perform a Factory Reset: This is a common solution for charging…
I purchased a doorbell from Amazon and found it was faulty. I have TWO of the squares as you should but in my case the both have the electrical squares that plug into electricity and nothing that can be put to the wall because it has the electrical two prongs onit. I tried returning it tow amazon but due to the fack that I was just getting up to walking and could not drive because I broke my leg I was late getting it back to amazon and they would not take it. My door bell is a CB-12 & CW-12 Can you help me ? I hate to throw the entire system in the trash,
I understand you're having trouble with your AVANTEK Wireless Doorbell Kit CB-12 & CW-12. It sounds like you received two plug-in receivers instead of…
How do I change the voice prompt language from Mandarin back to English on my TWS earbuds?
To change the voice prompt language back to English on many TWS earbuds, you can try the following common methods, as specific steps for…
How do I connect my Skullcandy Dime earbuds to my PC if it asks for a password?
The Skullcandy Dime earbuds do not have a default password or PIN. If your PC prompts you for one during the pairing process, try…
Why do my Pollini TP19 headphones keep beeping every few seconds?
A recurring beeping sound in Bluetooth headphones like the Pollini TP19 typically indicates one of the following issues: Low Battery: The most common cause…
What does it mean when the charging box flashes blue constantly and the earbuds do not light up or charge?
Based on the manual for the TWS (HBQ-i7tws) earphones, here is how to interpret the light signals and troubleshoot your issue: Charging Case Light:…
What does it mean when the charging box flashes blue continuously, and is it normal for the earbuds to show no lights when they are empty?
Based on the manual for the TWS True Wireless Stereo Earphones, here is the breakdown of the LED indicators and what you are experiencing:…
Why won't my Skullcandy Uproar Wireless headphones turn on or show a red light when charging?
If your Skullcandy Uproar Wireless headphones are not turning on and the LED does not light up red when connected to a charger, please…
Why is my left TWS earbud not producing sound even though it lights up and is paired?
If your left earbud is paired and lighting up but producing no sound, it may need to be manually re-synced with the right earbud.…
How can I fix my right TWS earbud if it is not charging correctly?
If your right earbud is not charging correctly, you can try the following troubleshooting steps: Check the placement: Ensure the earbud is placed correctly…
My Logitech G Pro X Superlight only works when wired after a firmware update. How can I fix the wireless connection?
If your Logitech G Pro X Superlight stopped working wirelessly after an update, it is likely that the mouse and the USB receiver have…
How do I use the power and ANC buttons, use Bluetooth without ANC, and fix connection issues where the blue light flashes despite the laptop showing a connection?
Based on the COWIN E9 manual, here is how to manage the controls and troubleshoot your connection: Power vs. ANC Button: The manual identifies…
Why does the red charging light stay on for hours without changing?
If the red indicator light on your TWS earbuds or charging case stays red for several hours without changing, it may indicate a charging…
What are the charging indicator light behaviors for the PE-TM002 probe and does it shut off automatically when charged?
Based on the user manual for the Paris Rhône PE-TM002, here are the instructions for charging the probe: Charging Setup: To charge the probe,…
How do you change the language from Chinese to English on TWS earbuds?
To change the language from Chinese to English on many TWS earbuds, you can try the following steps while the earbuds are powered on…
Why is one of my TWS earbuds not turning on or charging?
If one of your TWS earbuds is not turning on or charging, try the following troubleshooting steps: Check the Charging Case: Ensure the charging…
How do I fix the AUKEY EP-T27 earbuds if they are not connecting to each other?
If your AUKEY EP-T27 earbuds are not connecting to each other, you should perform a reset to clear the pairing list and re-establish the…
Can I purchase an additional transmitter for the AVANTEK CW-11 wireless doorbell?
Yes, the AVANTEK CW-11 system supports multiple transmitters. The manual indicates that the receiver has two indication lights (green and red) to distinguish between…