How do I skip tracks or go to the next/previous song on Stiive Bluetooth Headphones?
To control your music playback on the Stiive Bluetooth Headphones, use the volume buttons located on the headset: Next Track: Long press the Volume…
Manuals+ Q&A
Wireless questions & answers
Browse answered questions about Wireless, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Newest questionsWhy is the camera icon not appearing on my Godox Xpro-C trigger, and how do I fix the connection between the camera and the trigger?
If the camera icon is not appearing on your Godox Xpro-C LCD screen, it means the trigger is not detecting a proper connection with…
Why is my right ACREO OpenBud beeping continuously even when fully charged?
Persistent beeping in a single earbud, especially when it is fully charged and connected, often indicates a synchronization error between the two buds or…
Is there a device that can be added to the ABRAMTEK E600 or a turntable to allow for remote volume control?
The ABRAMTEK E600 does not come with a dedicated remote control; typically, volume is managed via the connected Bluetooth device (like a smartphone or…
How do I pair my TWS earbuds with my phone?
To pair your TWS earbuds with your phone, follow these steps: Power On: Press and hold the multi-function key on both the left (L)…
Can I make outgoing calls or use voice commands like 'Call Bob' directly from the SOAR NFL earbuds without using my iPhone?
Based on the product documentation and user feedback, you cannot initiate outgoing calls or use voice commands (like "Call Bob") directly from the SOAR…
Can I pair two Musibaby M68 speakers together while playing music from a single USB flash drive?
Based on the Musibaby M68 manual, you can pair two speakers together for a Wireless Dual Pairing experience. When two speakers are turned on,…
How can I adjust the volume of the JYX-V15 wireless microphone if it is too loud?
Based on the JYX-V15 manual and technical specifications, the microphone itself does not have a built-in volume control dial. To adjust the volume, you…
Why is the noise cancellation on the Ordtop I21L earbuds not working as advertised?
Based on the product documentation and user feedback for the Ordtop I21L, there is no mention of Active Noise Cancellation (ANC) technology in the…
Can the MUBVIEW Bell-J7 chime box be powered via its USB port, and what type of batteries should be used?
Based on the MUBVIEW Bell-J7 manual, the indoor chime is designed to be 100% wireless and typically uses standard AA alkaline batteries. While you…
How can I connect my Virtavo 57401 camera to a 5GHz WiFi network, or what is the solution if it is incompatible?
The Virtavo 57401 Security Camera is not compatible with 5GHz WiFi networks. According to the product specifications and setup notes, the camera only supports…
How do I enable auto mode for recording incidents on the Vision Well CG6S camera?
Based on the Vision Well CG6S manual and product specifications, the camera typically records motion-triggered events for fixed durations (up to 20 seconds per…
Why is my Vision Well CG6S camera showing as offline or having a bad connection?
If your Vision Well CG6S camera is reporting a "bad connection" or staying offline after a reboot, please check the following troubleshooting steps based…
Why is my left earbud not automatically turning on when removed from the charging case?
If your left earbud is charging but not automatically turning on when removed from the case, it may be experiencing a synchronization or software…
Why is the volume on my OYIB wireless earbuds very low even when my iPhone volume is at maximum?
Since you have already tried resetting and reconnecting your OYIB MD058A earbuds, the issue likely stems from software volume limits or a hardware blockage.…
How can I fix the time discrepancy when reviewing SD card footage on my computer?
Time discrepancies on security camera recordings are typically caused by incorrect time zone settings or a lack of synchronization with the network. To fix…
How can I register for the app if the verification code is not sending, and can I turn off the fountain without the app?
It appears you are experiencing a network or server error while trying to register for the SoundCloud: Rhythm app. Here are some steps to…
How do I troubleshoot my Beats Solo3 Wireless headphones if they are not charging?
If your Beats Solo3 Wireless headphones are not charging, please try the following troubleshooting steps: Check the Connection: Ensure the micro-USB cable is firmly…
How do I connect my GPED Bluetooth earbuds to my iPad?
To connect your GPED earbuds to your iPad, follow these steps based on the manual's automated pairing process: Initiate Pairing: Remove both earbuds from…
How do I switch from military time to 12-hour format?
While the provided manual for the Vision Well CG6S does not explicitly detail the steps for changing the time format, this setting is typically…
How do I connect my GPED Bluetooth earbuds to my iPad?
To connect your GPED Bluetooth earbuds to an iPad, follow these steps based on the user guide: Automatic Pairing: Remove both earbuds from the…
How do I reset my Zihnic headphones to clear the pairing history and forget previously connected devices?
The provided manual for the Zihnic Foldable Wireless Headset does not specify a dedicated "factory reset" button combination to clear the pairing memory. However,…
How do I turn off the EWA A106Max speaker when it is unresponsive and the blue light is flickering?
To turn off the EWA A106Max, you must press and hold the single silicone button. If the device is unresponsive and the blue light…
How do I power on and reconnect my Vision Well CG6S camera after it has been turned off?
To get your Vision Well CG6S camera working again after it has been powered off, please follow these steps: Power On: Long press the…