How do I reset the UniFi Dream Router?
The provided "UniFi Dream Router: Quick Setup Guide" focuses on initial setup, component identification, and connection steps, but it does not contain specific instructions…
Manuals+ Q&A
Ubiquiti questions & answers
Browse answered questions about Ubiquiti, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Does the USW-Flex-Mini support SNMP protocol, and how can it be monitored using third-party tools?
The Ubiquiti USW-Flex-Mini does not support the SNMP (Simple Network Management Protocol). This is a hardware limitation of this specific entry-level model compared to…
Can the U7-Pro-Wall be mounted on a ceiling and does it provide signal behind the unit?
Based on the provided documentation for the Ubiquiti U7-Pro-Wall Access Point: Ceiling Mounting: While the manual focuses on wall installation (as indicated by the…
Why is my UniFi Travel Router (UTR) not appearing in the UniFi app on my iPhone 16 Plus during adoption?
If your UniFi Travel Router (UTR) is not showing up in the UniFi app on your iPhone 16 Plus, please check the following steps…
Can the 10G SFP+ port on the UDR7 be configured as a LAN port when using the UACC-CM-RJ45-MG SFP+ to RJ45 adapter?
Based on the UniFi Dream Router 7 (UDR7) documentation and standard UniFi OS capabilities, the 10G SFP+ port is highly flexible. While the installation…
How do I set up and align the Ubiquiti UBB-XG Building Bridge?
The Ubiquiti UBB-XG Building Bridge manual relies heavily on diagrams. Here is a summary of the setup and alignment process to help clarify the…
What is the purpose of the UniFi NAS Professional (UNAS Pro) and can it be used as a personal cloud for remote file access on an iPhone?
The UniFi NAS Professional (UNAS Pro) is a high-capacity Network Attached Storage (NAS) device designed to store and manage data locally on your own…
Can the UVC-G5-Bullet be installed in a small meeting room, does it work as a standalone device via QR code/mobile app, and is the microphone clear enough for meeting room use?
Regarding your questions about the Ubiquiti UVC-G5-Bullet: Installation in a meeting room: Yes, it can be installed in a small meeting room. While it…
Where can I find the user manual for the Ubiquiti UniFi U7 Pro Max?
You can find the instruction manual and installation guide for the Ubiquiti UniFi U7 Pro Max (WiFi 7 Access Point) through the following resources:…
Can the Ubiquiti Pro Max 16 PoE Switch be mounted to a wall?
Yes, the Ubiquiti Pro Max 16 PoE Switch is designed to be wall-mounted. According to the installation guide, the package includes the necessary hardware…
How do I add a U7 Lite access point to a UniFi Dream Machine (UDM)?
To add your U7 access point to your UniFi Dream Machine (UDM), follow these steps: Physical Connection: Connect the U7 access point to a…
How do I enable IPv6 on the Ubiquiti EdgeRouter X (ER-X)?
To enable IPv6 on the Ubiquiti EdgeRouter X (ER-X), you can use the Wizards tab in the EdgeOS configuration interface for the simplest setup.…
Does the UA-G2-Pro include a power supply or a 110V to 12V converter?
The UniFi Access Reader G2 Pro (UA-G2-Pro) does not come with a traditional 110V to 12V wall power adapter. Instead, it is powered via…
How do I troubleshoot WiFi instability and perform a factory reset on the UBIQUITI UX7 UniFi Express 7?
If you are experiencing intermittent WiFi disconnections or weakening signals with your UBIQUITI UX7 UniFi Express 7, a factory reset is a recommended troubleshooting…
Can the Ubiquiti LiteBeam AC Gen2 connect to wifi.id or Telkom Seamless networks?
The Ubiquiti LiteBeam AC Gen2 is primarily designed as airMAX AC CPE (Customer Premises Equipment) for Point-to-Point (PtP) or Point-to-MultiPoint (PtMP) links using the…
What is the maximum range in kilometers for the Ubiquiti LiteBeam LBE-5AC-LR?
The official datasheet for the LiteBeam AC GEN2 (LBE-5AC-LR) identifies it as a "Long-Range" (LR) model designed for long-range applications, but it does not…
Can I directly connect a Ubiquiti Cloud Gateway to the U7 Pro XG access point using PoE from the gateway?
Whether you can connect directly depends on the specific model of your UniFi Cloud Gateway and its PoE output capabilities. The U7 Pro XG…
How do I configure the LiteBeam AC Gen2 in Access Point mode to be compatible with a LiteBeam M5 in Station mode?
To allow a LiteBeam M5 (an older 802.11n airMAX M device) to connect to a LiteBeam AC Gen2 (an 802.11ac airMAX AC device), you…
Why do all the lights flash and then turn off after a reset on the UniFi Dream Router?
When you perform a factory reset on a UniFi Dream Router (UDR), the flashing of all lights typically indicates that the device has acknowledged…
How do I disable the DHCP server on the UCG Cloud Gateway Fiber?
To disable the DHCP server on your Ubiquiti Cloud Gateway (UCG) Fiber, you must access the UniFi Network application settings. While the physical instruction…
Can the Ubiquiti UniFi Mobile Router (UMR-US) be used to provide remote VPN access to an isolated Linux device connected via Ethernet?
Yes, this is a relevant and supported use case for the Ubiquiti UniFi Mobile Router (UMR-US). The device is designed to provide LTE-based internet…
How do I mount the Ubiquiti UAP-AC-M access point on a wall?
To mount the Ubiquiti UAP-AC-M access point on a wall, follow these steps: 1. Place the Wall Mount Bracket at the desired location on…
How do I mount the Ubiquiti UAP-AC-M-PRO access point on a pole or wall?
To mount the Ubiquiti UAP-AC-M-PRO access point on a pole, follow these steps: 1. Insert two Carriage Bolts into each Pole Clamp and attach…
How do I reset the UBIQUITI UAP-AC-LR UAP AC LR Access Point to factory default settings?
To reset the UBIQUITI UAP-AC-LR UAP AC LR Access Point to factory default settings, follow these steps: 1. Locate the Reset button on the…