Why does my Lowrance Eagle 5 display 'arrêté' (stopped) on startup?
When a Lowrance Eagle 5 unit displays "arrêté" (stopped) on startup, it typically refers to the sonar state being paused or disabled. Please check…
Manuals+ Q&A
Transducer questions & answers
Browse answered questions about Transducer, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Where can I find the Product Data Sheet for the BK Medical E14CL4b transducer with detailed reprocessing and cleaning instructions?
The BK Medical E14CL4b Transducer user manual indicates that detailed reprocessing methods and a list of compatible cleaning agents are not contained within the…
Why does my Lowrance Eagle 9 display 'blocked' (geblockt) on the screens after powering on?
If your Lowrance Eagle 9 displays "geblockt" (blocked) on the screen panels, it typically indicates that the device is not receiving data for those…
How do I create a custom page on the Lowrance 000-15503-001 Hook Reveal Fish Finder?
To create a custom page on the Lowrance 000-15503-001 Hook Reveal Fish Finder, follow these steps: 1. On the Home page, locate the Tools…
How do I connect the SoundShaker TA-4800 Bass shakers Amplifier and Transducer to my audio system?
To connect the SoundShaker TA-4800 Bass shakers Amplifier and Transducer to your audio system, please follow the installation guide provided. Here are the steps:…
How do I test the Humminbird portable transducer before installation?
To test the Humminbird portable transducer before installation, follow these steps: 1. Connect the control head to power according to the control head installation…
How do I determine the best location on my boat's transom to install the Humminbird Side Imaging transducer?
To determine the best location on your boat's transom to install the Humminbird Side Imaging transducer, you should consider a few factors. First, you…
How do I calibrate the CO2 sensor on the S S REGELTECHNIK RCO2-AS GmbH Room CO2 Sensor & Transducer?
To calibrate the CO2 sensor on the S S REGELTECHNIK RCO2-AS GmbH Room CO2 Sensor & Transducer, you have two options: automatic calibration and…
How do I install the SIPATEC TR.Ex Analog Transducer in a hazardous area?
To install the SIPATEC TR.Ex Analog Transducer in a hazardous area, please follow these steps: 1. Ensure that you have read and understood the…
How do I adjust the settings on the STAHL 212432 Vibration Transducer Supply Device?
To adjust the settings on the STAHL 212432 Vibration Transducer Supply Device, follow these steps: 1. Locate the easily accessible rotary switch on the…
How do I calibrate the S S REGELTECHNIK TM43 Temperature Measuring Transducer?
To calibrate the TM43 Temperature Measuring Transducer, follow these steps: 1. Ensure that the device is powered off and disconnected from the power supply.…
How do I connect the COMET Programmable Temperature Transducer to a PC for configuration?
To connect the COMET Pt1000 Programmable Temperature Transducer to a PC for configuration, please follow these steps: 1. Unscrew the four screws on the…
How do I calibrate the S S REGELTECHNIK TM 54 Thermasgard Duct Temperature Measuring Transducer?
According to the manual, the S S REGELTECHNIK TM 54 Thermasgard Duct Temperature Measuring Transducer is calibratable. Here is a step-by-step guide on how…
Where is the best location to mount the transducer for my HUMMINBIRD Helix 8 CHIRP MDI GPS G3N with Transducer?
According to the user manual for the HUMMINBIRD 410820-1M Helix 8 CHIRP MDI GPS G3N with Transducer, the best location to mount the transducer…
How do I properly connect the Maretron pressure transducer to NMEA network using Maretron FPM100?
To properly connect the Maretron PT-V-0-1BAR-01 pressure transducer to the NMEA 2000 network using a Maretron FPM100 or CLM100, follow these steps as per…
How can I modify the settings of the T4111 Transducer using a PC?
To modify the settings of the T4111 Transducer using a PC, you will need the optional SP003 communication cable (not included in delivery) and…