Can the Autel MaxiCOM MK900-TS perform diagnostics on buses and trucks?
The Autel MaxiCOM MK900-TS is primarily designed for passenger vehicles and light-duty trucks. It generally does not support heavy-duty diagnostics for buses or large…
Manuals+ Q&A
Scanner questions & answers
Browse answered questions about Scanner, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Newest questionsHow do I enable Full ASCII mode on the TeamOffice CQH20G barcode scanner?
Based on the provided manual for the TeamOffice CQH20G Wireless 1D-2D Barcode Scanner, there is no specific configuration barcode listed to enable "Full ASCII"…
How do I add a new car or troubleshoot an OBD2 connection failure on the XTOOL AD20 Pro after an ECU change?
To add a new vehicle or troubleshoot a connection failure after an ECU change on your XTOOL AD20 Pro, please follow these steps based…
How can I prevent the Inateck P7 from storing scanned data in its internal buffer?
The Inateck P7 is designed to automatically store data in its internal buffer when it is out of wireless range or in specific modes.…
How do I register my LAUNCH CRP123 OBD2 scanner?
To register your LAUNCH CRP123, follow these steps: Download the Update Tool: Go to www.x431.com/CRP123 on a Windows computer (XP, 7, 8, or 10).…
How do I reset my XTOOL AD20 Pro if it says 'the device has been activated by others' after switching phones?
The error message "the device has been activated by others" or "bound to other users" typically occurs if you are trying to log in…
Where is the authorized service center for Netum barcode scanners in Izmir, Turkey?
The provided manual for the NETUM NT-1200 Barcode Scanner does not list specific local service centers in Izmir, Turkey. The official contact information provided…
My scanner won't connect to my receiver. I did the pairing mode and it won't connect. It cannot find my receiver (USB receiver).
To connect your Datamax AT001 2D Wireless Barcode Scanner to its 2.4G USB receiver, please follow these steps: Scan the two QR codes under…
Is there a Polish manual available in PDF format?
Currently, the official manual provided for the LAUNCH X431 Creader Elite 2.0 BBA is in English. However, you can access a digital version of…
Does removing a 120 ohm resistor from the Veepeak OBDCheck VP11 PCB enable ECU coding?
The official manual for the Veepeak OBDCheck VP11 does not support or provide instructions for hardware modifications such as removing resistors. Modifying the PCB…
Why can't I access all functions on my ANCEL FX2000 scanner?
If you are unable to access all functions or the tool is not working correctly with your vehicle, a software update is likely required.…
How can I access all functions of the ANCEL FX2000 and is there a Portuguese manual available?
To explore all functions of your ANCEL FX2000, follow these general steps to navigate the device: Diagnose: Select this icon from the main menu…
The WhatsApp contact number provided for support does not exist.
If the WhatsApp number you are trying to reach is not working, please use the official contact methods provided by SUNLUX IOT Technology (Guangdong)…
Is it possible to disable the 2D barcode scanning function?
Based on the provided user guide for the syble XB-6208RB, there is no specific configuration barcode listed to selectively disable 2D barcode scanning while…
Can the XTOOL AD20 Pro turn off the airbag light?
The provided manual states that the XTOOL AD20 Pro can read and clear codes in all available systems. This implies it should be able…
How do I set a prefix for the Newland NLS-FR42-BT barcode scanner?
To configure a prefix or suffix on the Newland NLS-FR42-BT, you must follow a specific programming sequence using the barcodes found in the manual.…
How do I perform key programming with the XTOOL D7S?
The provided user manual for the XTOOL D7S does not contain a specific step-by-step procedure for ignition key programming. While the device is an…
Why does my Rabitpos barcode scanner get stuck with a blue light and stop scanning?
Based on the Rabitpos B09B71S176 manual, a persistent blue light or failure to scan often indicates a connection or transmission error. Please try the…
How do I see the auxiliary battery voltage?
To view the battery voltage using the TOPDON TopScan, follow these steps within the app: Ensure the TopScan dongle is plugged into the vehicle's…
Does the AUTOPHIX 3210 work with a 2007 Citroen C5 diesel?
The AUTOPHIX 3210 is designed to work with vehicles that support standard OBDII protocols. For diesel vehicles in Europe (such as your 2007 Citroen…
Where is the official store or dealer for the genuine JDiag M200 scanner in Bekasi, Indonesia?
The provided manual and manufacturer information do not list specific retail store locations or authorized dealers in Bekasi, Indonesia. To ensure you are purchasing…
Does the MUCAR DRIVERSCAN include lifetime free updates or a lifetime subscription?
The MUCAR DRIVERSCAN is designed to provide long-term value with specific "free for life" features. According to the product documentation: OBD2 Data: The device…
How and where can I upgrade the STREX OBD2 scanner for a 2000 Volvo V70?
Based on the STREX OBD2 Scanner (Model SP50) manual, there are no specific instructions provided for user-performed firmware or software upgrades. The device is…
Why is the TOPDON TopScan considered a bi-directional scanner?
The TOPDON TopScan is considered a bi-directional scanner because it can both receive information from your vehicle and send commands to the vehicle's various…