How can I configure the Roland V-160HD so that the AUX bus triggers a red tally light on the corresponding camera?
To ensure that cameras selected on the AUX bus trigger a red (On Air) tally light on the Roland V-160HD, you must adjust the…
Manuals+ Q&A
Roland questions & answers
Browse answered questions about Roland, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Can SDI input 3 on the Roland V-1SDI be converted or used interchangeably with HDMI, and if so, how?
On the Roland V-1SDI, the inputs are hardware-specific and cannot be internally switched between SDI and HDMI for the same channel number. The device…
How do I input a different audio source separate from the video?
Per inserire un segnale audio separato o diverso dai video sul Roland V-8HD, puoi utilizzare gli ingressi audio analogici dedicati sul pannello posteriore: Collega…
How do I access Group C and Group D on the Roland RA-90 Realtime Arranger?
Based on the Roland RA-90 Service Notes and standard Roland GS sound architecture, accessing different banks or groups typically involves using the TONE or…
How do I configure and set up the Roland MDS-3C drum stand?
To configure and set up your Roland MDS-3C Drum Stand, follow these primary steps based on the owner's manual: Unpack Accessories: Ensure you have…
How do I adjust the Roland R-05 menu settings to control whether the device stops at the end of a track or continues to the next, and how do I use the split function?
To adjust the playback and recording behavior on your Roland R-05, you will need to navigate the internal menu using the directional rocker switch.…
How do I find the part number for the ribbon connector between the circuit board and the digital display on the Roland BR-8 Digital Recording Studio?
Based on the Roland BR-8 Digital Recording Studio Service Notes, the ribbon connector (flat cable) that connects the main circuit board to the digital…
How can I quickly change octaves on the Roland RD-2000 while playing, similar to the knob/wheel function on the Juno-6?
On the Roland RD-2000, you can quickly change octaves or transpose your performance using the following methods: Transpose Button: To shift the pitch, hold…
Does the Roland RD-2000 have a function where the sound gradually increases in volume after a key is pressed?
Yes, the Roland RD-2000 has several ways to achieve a sound that gradually increases in volume (a "swell" or "slow attack" effect): Tone Color…
Where can I find the download link for the Roland SPD-20 PRO owner's manual?
You can download the Roland SPD-20 PRO Owner's Manual directly from Manuals+ using the link below: Download Roland SPD-20 PRO PDF Manual For additional…
Why is there no sound when I connect my Audio-Technica ATR1300X microphone to the Roland AC-33 using a 6.3mm mono plug?
If you are not getting sound from your Audio-Technica ATR1300X microphone on the Roland AC-33, please check the following steps based on the owner's…
How do I set up and connect the Roland FD-8 Hi-Hat Controller?
To set up the Roland FD-8 Hi-Hat Controller, follow these steps for assembly and connection: Physical Setup: Place the pedal on a level surface.…
Can the sound settings for the snare head and rim shot be adjusted separately on the Roland V71?
Yes, you can adjust the head and rim settings separately on the Roland V71 by using the H&R LINK (Head and Rim Link) function.…
How do I reset the Roland E-X50 arranger keyboard or fix an error when the device freezes and requires a power cycle?
If your Roland E-X50 is freezing or experiencing errors that require you to disconnect the power, you should first attempt a Factory Reset to…
How do I increase the volume in Dual mode on the Roland FP-30X digital piano?
To adjust the volume on the Roland FP-30X, you can use the following methods: Overall Volume: Use the Volume Slider located on the control…
Why is my looper footswitch no longer working correctly with my CUBE Street II?
The Roland CUBE Street II is designed to work with specific footswitch types (typically momentary footswitches like the BOSS FS-5U, FS-6, or FS-7). If…
How do I cascade two Roland STUDIO-CAPTURE UA-1610 units together?
To cascade two Roland STUDIO-CAPTURE UA-1610 units for expanded I/O (up to 32 inputs and 20 outputs), you must use the VS STREAMING driver…
How do I replace the mesh head on the Roland KD-140, and should the sensor cushion be glued to it?
According to the Roland KD-140 Owner's Manual, the sensor cushion is a separate component located under the head and should not be glued to…
How do I connect the Roland DJ-707M Four-Deck Serato DJ Controller to my computer?
To connect the Roland DJ-707M Four-Deck Serato DJ Controller to your computer, follow these steps: 1. Make sure your computer is powered on and…
How do I connect my Roland FP-10 Digital Piano to the Piano Partner 2 app?
To connect your Roland FP-10 Digital Piano to the Piano Partner 2 app, follow these steps: 1. Make sure the Bluetooth function is enabled…
Can the Roland V-60HD video switcher output in 4K resolution?
No, the Roland V-60HD video switcher does not support 4K output. Its highest resolution setting is 1080p at 59.94 Hz. Therefore, it will not…
How do I prevent false triggering on the Roland TM-1 Dual Input Trigger Module?
To prevent false triggering on the Roland TM-1 Dual Input Trigger Module, you can follow these steps: 1. Adjust the position or angle of…
How do I import user samples into the TR-6S?
To import user samples into the TR-6S, follow these steps: 1. Prepare your user samples: Make sure your samples are in a compatible format…
How do I import my own samples into the Roland TR-8S AIRA Rhythm Performer?
Yes, you can import your own samples into the Roland TR-8S AIRA Rhythm Performer. Here's how you can do it: 1. Prepare your samples:…