How do I update the software for the Microlife BP3GY1-2N blood pressure monitor?
The Microlife BP3GY1-2N is designed to work with the Microlife Connected Health+ software. To ensure you have the latest software and firmware capabilities, please…
Manuals+ Q&A
Monitor questions & answers
Browse answered questions about Monitor, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Newest questionsWhat should I do if the monitor shows 'No Signal' and enters 'Power Saving Mode' after turning it on?
If your KTC H27T22 monitor displays "No Signal" and enters power saving mode, please try the following troubleshooting steps based on the user guide:…
Why is there no sound coming from my Acer KA2 series IPS monitor?
If you are experiencing no sound from your Acer KA242Y or KA2 series monitor, please follow these troubleshooting steps based on the manual: Check…
Are the LCD display icons for the battery indicator and alarm activated reversed in the manual?
Based on the LCD display icon introduction section (page 7 of the English manual), there appears to be a discrepancy in the labeling of…
Can I use the LG 27US500 monitor with an old PC outputting 3840x2160 at 25Hz or 1920x1080 at 50Hz via HDMI?
Yes, you can generally use the LG 27US500 with an older PC, provided it has a standard HDMI output. While the monitor is designed…
Why does my blood pressure monitor show readings like 14.6 and 7.6, and how do I change the units?
Your MMIZOO W1681 monitor is currently displaying readings in kPa (kilopascals) instead of the standard mmHg (millimeters of mercury). A reading of 14.6 kPa…
Why am I getting a 'loading failed' error when trying to load an N-Log .cube LUT from an SD card onto my Godox GM6S monitor?
If your Godox GM6S is displaying a "loading failed" (or "laden falsch") error when importing a 3D LUT, please check the following technical requirements…
Can the VBV-770HM monitor display both front and rear camera views?
Yes, the Brigade VBV-770HM monitor is capable of displaying multiple camera views. According to the technical specifications, the monitor features 3 camera inputs (labeled…
How do I use the Akuvox C313X-2 Smart Intercom after it has been connected?
Once your Akuvox C313X-2 is connected and powered, follow these basic operation steps: Configuration: Press the Status icon on the touch screen to find…
How do I turn off the Wellue VisualBeat Heart Rate Monitor to stop it from flashing green and draining the battery?
The Wellue VisualBeat Heart Rate Monitor does not have a physical power button. Instead, it uses an automatic power management system based on whether…
How do I troubleshoot sound issues when connecting my LG 27U421A monitor to a laptop?
To troubleshoot sound issues with your LG 27U421A monitor, please check the following steps based on the hardware configuration shown in the manual: Check…
How do I set the time and day on the SmartHeart 01-742T Talking Blood Pressure Monitor?
The provided Quick Start Guide for the SmartHeart 01-742T does not contain the specific button sequence for setting the time and day. It is…
Why is the volume not increasing when using the monitor's joystick?
If the joystick on your BenQ GW2490 is not responding to volume changes, please try the following troubleshooting steps: Check the OSD Menu: Press…
The headphone jack on my Gawfolk GF240I monitor is not producing sound, even with different headphones that work on other devices. Do you have a solution?
The provided manual for the Gawfolk GF240I monitor does not contain specific troubleshooting steps for the headphone jack not producing sound. However, general troubleshooting…
Why did my Baby 1S camera move on its own and show a solid red light?
Based on the Babytime Baby 1S User Guide, here is the breakdown of what you experienced: Solid Red Light: According to the manual (page…
Why won't my Myzone MZ-Switch turn on even though it is fully charged?
If your Myzone MZ-Switch is fully charged (indicated by a pulsing green light during charging) but will not turn on, please check the following…
How to know when the monitor is fully charged?
The user manual states that the parent unit (monitor) takes 5 hours for a full charge. However, it does not specify a visual indicator…
How do I clear or reset a single channel on the DD1802H emitter?
The provided manual for the DD1802H 15-channel LCD emitter does not specify a direct "clear" or "reset" function for an individual channel. However, you…
What are the technical specifications for the PWM brightness control pads on the DLH05170B monitor?
The provided manual for the ELECROW DLH05170B identifies the location of the PWM Expansion pads (labeled as item 12 on page 8) but does…
What does it mean when the camera status light changes from red to blue?
According to the GHB ABM809 manual, the status indicator light on the camera provides information about its power and connection status: Blue Light: When…
How do I turn off the audio feature on the Lazle JPD-HA101 blood pressure monitor?
To turn off the audio feature on the Lazle JPD-HA101 Blood Pressure Monitor, follow these steps: Ensure the device is powered off. Press and…
How do I erase all previous data and reset the time and date to the current time and date?
The provided user manual for the Checkme BP2A Arm Blood Pressure Monitor does not contain specific instructions on how to erase all previous data…
How do I cycle through camera views on the Brigade VBV-7104HFM-M monitor?
Based on the VBV-7104HFM-M manual, the Enter/Return button (indicated by a curved arrow icon) is primarily used as the OK button for menu selections.…
Why does the short-term average display always show 'Day 1' on my Life Basis RN55 Radon Monitor?
The "SHORT TERM AVERAGE" on your Life Basis RN55 monitor is designed to alternate between two different readings: the average radon value for the…