Why is the laundry warm when I take it out after a 60-degree cotton wash?
It is normal for laundry to feel warm if it is removed immediately after a high-temperature cycle like the 60°C Cotton program. This occurs…
Manuals+ Q&A
Machine questions & answers
Browse answered questions about Machine, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Newest questionsHow do I remove the lid from the Aussie Traveller AT-2500 washing machine?
The provided manual for the Aussie Traveller AT-2500/AT-3200 does not contain instructions for removing the lid. The manual only provides guidance on opening and…
Why is the screen display not turning on on my new GY-LASER-M01 machine?
If your new GY-LASER-M01 machine's screen is not turning on, please follow these troubleshooting steps from the manual: Check the Emergency Stop Switch: Ensure…
Why is my YESOUL R40S rowing machine belt jerking when I pull, and where can I find a repair person in Jakarta, Indonesia?
Based on the YESOUL R40S instruction manual, jerky movements or "a coups" when pulling the strap are typically caused by a loosening of the…
Why are my towels still wet after the drying cycle?
If your towels are still wet after a cycle, consider the following troubleshooting steps based on the user manual: Check the Load Size: Ensure…
How do you charge the ALE-HOP 4 in 1 Hair Cut Machine?
To charge the ALE-HOP 4 in 1 Hair Cut Machine, follow these steps: Turn off the device using the power button. Insert the charging…
Why has my espresso machine stopped frothing milk and how can I fix it?
If your De Longhi Magnifica Start (ECAM22X.2Y) has stopped frothing milk, the most common cause is a blockage in the steam wand or milk…
What do modes A, B, C, and D represent on the LW-101 cavitation machine?
In the Glow Beauty Case LW-101, the modes (A, B, C, and D) represent different pulse patterns or output frequencies for the cavitation and…
How do I adjust the coffee length on the Philips Series EP2220?
To adjust the coffee length (quantity) on your Philips Series EP2220, follow these steps: Select your drink: Tap the icon for the type of…
Which program is best suited for wool and down?
For the Haier HW70-BP14929 washing machine, the following programs are recommended for these specific materials: Wool: Use the dedicated Wool program. This cycle is…
Which program is best suited for wool and down?
For the Haier HW70-BP14929 washing machine, the following programs are recommended for these specific materials: Wool: Use the Wool program. This cycle is specifically…
What does error code E08 mean on my Hoover washing machine?
According to the Troubleshooting section of the manual (page 26), the E08 error code is categorized under "Any other code." While specific codes like…
What does the error code dC3 mean on my Samsung washing machine and how do I fix it?
The error code dC3 (or DC3) on a Samsung washing machine specifically refers to an issue with the AddDoor (the smaller door used to…
What should I do if my Siemens iQ500 washing machine is not working after a circuit breaker trip?
If your Siemens iQ500 washing machine is not working after a circuit breaker trip, please follow these troubleshooting steps: Check the Power Supply: Ensure…
How do I fix a 1mm offset and unwanted rounded corners when performing a Print-Then-Cut on the Likcut S41?
The issue you are describing, where the cut is offset by 1mm and has rounded corners, is typically caused by the Bleed setting or…
What is the legend for the detergent dispenser compartments?
The detergent dispenser for the Hisense WF3S1043BW3 washing machine consists of three main compartments. Depending on your specific model, the layout may vary slightly…
How do I open the washing machine door after the wash cycle has finished?
To open the door of your Electrolux EWF8024D3WC after a wash cycle, please follow these steps: Wait for the Lock to Release: After the…
How can I repair or glue a cracked flexible drain hose that is attached to the washing machine?
According to the Daewoo WM710T0WU0ES User Manual, you should never attempt to carry out any repairs yourself in the event of a breakdown or…
Why is my Samsung WA13F5S2 top-loader washing machine not spinning?
If your Samsung WA13F5S2 top-loader is not spinning, there are several common causes to investigate based on the product's assembly: Unbalanced Load: This is…
Why does my Nespresso Zenius 9737 water tank leak only when it is placed on the machine?
If your Nespresso Zenius 9737 water tank only leaks when placed on the machine, it usually indicates an issue with the connection seal or…
Where can I get replacement parts for my BrassCraft BC3020 drum auger?
To obtain replacement parts for your BrassCraft BC3020 Cable Drum Machine, you should contact BrassCraft Customer Service directly at 877-319-3757. According to the manual,…
How do I change stitches and needle position on the White 1418 sewing machine?
To change stitches and needle positions on the White 1418, use the control dials located on the front of the machine: Changing Stitches: The…
How much is 1.5 scoops of white vinegar for descaling the Mueller MLR010557N Espresso Machine?
According to the Descaling Preparation section of the manual (page 21), the measurement for using white vinegar is as follows: Add 1.5 scoops of…
Where can I find a replacement drive belt for the Gude GMD 400 mini lathe?
According to the manual for the Gude GMD 400, the drive belt is considered a wear part that must be replaced if necessary. To…