What should I do if only part of the MYPLUS 5M-Dimmable LED Strip Light is lit up?
If only part of the MYPLUS 5M-Dimmable LED Strip Light is illuminated, there could be a few reasons for this issue. Here are some…
Manuals+ Q&A
Light questions & answers
Browse answered questions about Light, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Newest questionsHow do I adjust the brightness of the Maylit 3-Pcs Under Cabinet Light?
To adjust the brightness of the Maylit 3-Pcs Under Cabinet Light, you can use the built-in touch dimmer switch. A short touch turns the…
Why are my TJOY TA2B1502415 LED Strip Light sections not lighting up properly?
If sections of your TJOY TA2B1502415 LED Strip Light are not lighting up, there are a few potential reasons and solutions to consider: 1.…
How do I sync the TJOY TA2W1502475-3 LED Strip Light to music?
The built-in microphone in the TJOY TA2W1502475-3 LED Strip Light allows the lights to flash and change colors in real-time with surrounding music. This…
How can I replace the batteries in the OTYTY W840-R LED Work Light?
The OTYTY W840-R LED Work Light comes with a built-in rechargeable lithium polymer battery with a capacity of 4200mAh. While the battery is not…
How do I switch between different lighting modes on the OTYTY W52 Rechargeable Work Light?
To switch between different lighting modes on the OTYTY W52 Rechargeable Work Light, follow these steps: 1. **Turning On:** Press the power button once…
How do I set up and operate the AVTechsmart miniRETROB100L Light for different lighting effects?
To set up and operate the AVTechsmart miniRETROB100L Light for different lighting effects, follow these steps based on the provided user manual: 1. **Built-in…
How do I properly install the LIGHT 10112C Light?
To properly install the LIGHT 10112C Light, follow these steps: 1. **Ensure Proper Installation:** Before connecting the light to electricity, make sure that the…
How do I install the allen + roth SFL104MBK Willow LED Flush Mount Light?
Here is a step-by-step guide on how to install the allen + roth SFL104MBK Willow LED Flush Mount Light based on the user manual…
How do I synchronize multiple lightheads on my vehicle using the cell2 160607M53 Light assembly?
To synchronize multiple lightheads on your vehicle using the cell2 160607M53 Light assembly, follow these steps as outlined in the product manual: 1. **Synchronization…
How do I change the color temperature (CCT) setting on the DOMUS Lighting MIRROR-15 Wall Vanity Picture Light?
To change the color temperature (CCT) setting on the DOMUS Lighting MIRROR-15 Wall Vanity Picture Light, follow these steps: 1. After installing the light…
How do I replace the bulbs in the Saxby Lighting 61640 Salvo Wall Light?
To replace the bulbs in the Saxby Lighting 61640 Salvo Wall Light, follow these steps as per the instruction manual: 1. **Switch off the…
How do I determine the correct hanging height for the light fixture?
According to the assembly and installation instructions provided in the manual, here is how you can determine the correct hanging height for the light…