Can I buy the installation rings separately?
The user guide for the FEIT Electric 74206 does not explicitly list "installation rings" as a standalone retail part. However, the hardware kit includes…
Manuals+ Q&A
Light questions & answers
Browse answered questions about Light, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Newest questionsHow do I pair the remote control for the SHIHOT B0C36W7JR1 Ceiling Fan Light and troubleshoot battery drain issues?
Based on the manual for the SHIHOT B0C36W7JR1 Ceiling Fan Light, here is the guidance for your remote control issues: Pairing the Remote Since…
Can I keep the lamp on continuously without motion, effectively bypassing the motion sensor?
Based on the technical specifications for the Philips CL253 Ceiling Light, the device features an integrated motion sensor designed for automatic light control. The…
My PopBloom RL60 WiFi LED fan is making a loud noise. What is the solution, and can I get a replacement fan?
If your PopBloom RL60 WiFi LED light fan is making a loud noise, it may be due to dust accumulation or a mechanical failure.…
How do I run the wire through the bottom cap of the Moon-De-Age BKLVGL00202 bollard light?
Based on the instruction manual for the Moon-De-Age BKLVGL00202, the wiring process involves the following steps regarding the base and connector: Routing: The supply…
How do I troubleshoot or pair the Bell Arella 400 remote if it is not communicating with the tail light?
If your Bell Arella 400 remote is not communicating with the tail light, please follow these troubleshooting steps based on the product manual: Check…
How do I configure the lamp to stay on all night?
To configure your POBOMVOM Solar Pendant Light to stay on constantly throughout the night, you should use Mode 3. According to the manual, Mode…
How do I unmute the Motorola PIP11 parent unit?
To unmute the Motorola PIP11 parent unit, you can use the volume controls on the front of the device: Increase Volume: Press the Scroll…
Where is the power on/off switch located on the Dorcy 41-4379 flashlight?
The 3 Mode Power Switch on the Dorcy 41-4379 is located on the side of the flashlight body, positioned between the head (the part…
What does the instruction 'Turn on the car lights' mean in the pairing process?
In the context of the GIANT HL1200 Recon Plus Front Light manual, the instruction to "Turn on the car lights" is a translation error…
How do I use the remote control for the TG-TY07301 solar motion sensor light?
To use the remote control for your TG-TY07301 Solar Motion Sensor Light, first ensure the Back Switch on the light unit itself is turned…
Why does my screen turn off after one or two seconds?
If the display on your NEEWER RGB61 turns off after only a second or two, it is most likely due to a low battery…
What charger works with this selfie ring light?
The B094FB46X7 Selfie Ring Light is typically powered via a USB cable. You can use any standard 5V USB power source, such as: A…
Why are my emergency lights not working after replacing the battery pack, and why were they previously staying on constantly?
Based on the Sure-Lites APC7RG manual, here are the steps to troubleshoot your emergency light after a battery replacement: Check AC Power: The manual…
How do I switch the Matrix Bar Pro from Auto mode to DMX mode?
To switch your Citronic Matrix Bar Pro to DMX mode and stop it from running in Auto mode, follow these steps using the control…
Why does my remote beep but the fan does not work?
If your remote is beeping but the fan is not responding, it indicates the remote is sending a signal, but the receiver or motor…
How do the wire connectors work for the Commercial Electric 4FT LED Strip Light?
Based on the installation guide, the wire connectors (referred to as terminal caps) are used to secure the electrical connections between your house wiring…
Why is the high beam on my ACID 200 front light not working even after replacing the remote battery?
Based on the manual for the ACID E-Bike Front Light PRO-E 200 HB X-CONNECT, if your high beam is not functioning after a battery…
Where can I purchase a replacement CMS-SDM1 transformer plug for Yuusei G40 LED string lights in the UK?
The manual for the Yuusei G40 LED String Light does not list specific retailers for replacement parts; however, the manufacturer is identified as Shenzhen…
How do you replace the LED lights in the Artika Melted Ice vanity light?
The LED lights in the Artika Melted Ice LED Vanity Light (VAN-MI-MB) are integrated into the fixture and are not replaceable. Unlike traditional fixtures…
Do I need to download an application for the Magicshine Ray 1600?
No, you do not need to download an application to use the Magicshine RAY 1600. The manual does not mention any app connectivity or…
Do I need to disassemble the device to clean the fan blades, or is there an easier way?
According to the maintenance section of the manual, you do not need to disassemble the fan for regular cleaning. The recommended procedure is to…
Where should the O-rings be placed on the Wurkkos DL30, and are the included ones spares?
According to the Troubleshooting and Maintenance section of the Wurkkos DL30 manual, the two O-rings included in the package are spares. The manual states:…
How do I quickly set the spot mode?
The provided manual for the WEEFINE WF081 Smart Focus 7000 Video Light does not explicitly mention a "spot mode" or instructions for quickly setting…