HOT TOOLS questions & answers

Since your Hot Tools Professional device is out of warranty and experiencing power issues (not turning on or having a loose connection), please note…

The product manual you are viewing is for the Hot Tools Pro Signature Titanium Ceramic Deep Waver, Model HTIR1595. While the external link you…

If your Hot Tools Volumizer has stopped heating or is only blowing cool air, please check the following troubleshooting steps based on the owner's…

To adjust the ion output on the HOT TOOLS 1044 Tourmaline Ionic 1875 Watt Hair Dryer, you can use the Variable Ion Dial. The…

Adjusting the heat and speed settings on the Hot Tools Professional 1035 Hair Dryer is easy. Here's how you can do it: 1. Start…

To change the voltage on the HOT TOOLS HTDR5582 Travel Dryer, follow these steps: 1. Use a small screwdriver to adjust the voltage selector…

Cleaning the lint filter of the Hot Tools 1023PLV6 Turbo Ionic Hair Dryer is an important maintenance step to ensure optimal performance. Here is…

To clean and maintain the HOT TOOLS HT7017BG Ionic Hair Dryer, follow these steps: 1. Ensure the hair dryer is unplugged and cool before…

Cleaning the lint filter of the Hot Tools Pro Artist Turbo Hair Dryer is important to maintain its performance and prevent overheating. Here's how…

The Hot Tools HT7015D Turbo Ceramic Hair Dryer offers three heat settings, allowing you to choose the right temperature for your hair type and…

To clean the bristles of the Hot Tools HTDR5586 Pro Signature One-Step Volumizer, follow these steps: 1. Make sure the appliance is unplugged and…

To maintain your HOT TOOLS 1043 Turbo Hair Dryer and ensure optimal performance, it is important to follow proper cleaning and maintenance procedures. Here…

To change a brush attachment on the Hot Tools HT1097BG Hair Dryer, follow these steps: 1. Turn off the hair dryer and unplug it…

Adjusting the heat and speed settings on the Hot Tools HT7007DRB Turbo Ceramic Hair Dryer is simple. Here's a step-by-step guide: 1. Locate the…

Adjusting the heat and speed settings on the HOT TOOLS HTDR5580 Ionic Ceramic Hair Dryer is simple. Here's a step-by-step guide: 1. Plug in…

If your Hot Tools HT7123BG Professional Flat Iron is not heating up, you can follow these troubleshooting steps based on the instruction manual: 1.…

Your appliance is virtually maintenance-free. No lubrication is needed. Keep heated surfaces clean and free of dust, dirt, and hair spray. If cleaning becomes…