Gaming Headphones questions & answers

If your right Monster Airmars XKT21 earbud is not charging, you can try the following troubleshooting steps before seeking professional repair: Clean the Charging…

Based on the QILIAN Ultra Open Ear Gaming Headphones manual, here are the steps to address your connectivity and microphone issues: Dongle Connectivity: If…

This issue occurs when the earbuds lose their synchronization with each other and enter mono mode, which is why you see two separate Bluetooth…

If only one earbud is working, it usually indicates that the earbuds have lost their pairing with each other. You can resolve this by…

According to the Gtheos Captain 300 User Guide, the LED lights are controlled by the Light Control Button (labeled as button 2 in the…

When your Monster Airmars XKT21 earbuds appear as two separate devices, it means they have lost their TWS (True Wireless Stereo) synchronization. To resolve…

If your ONIKUMA K16RGB microphone is not working on the Nintendo Switch, please check the following steps: Check the Physical Mute Switch: Ensure the…

If your Monster Airmars XKT21 earbuds are working as two separate devices, they need to be resynchronized to enter TWS (True Wireless Stereo) mode.…

According to the Gtheos Captain 300 User Guide, the LED lights are controlled by the Light Control Button, not the microphone mute button. To…

Based on the Raycon RBH861USB (The Gaming Headphones) manual, there is no specific button combination listed for a full factory reset. However, you can…

The manual provides the following steps for pairing and troubleshooting: Pairing Instructions: Take out the earbuds from the charging case. Turn on your mobile…

To resolve issues with the dongle and detachable microphone on your boAt Immortal 1300, please follow these troubleshooting steps: Dongle Connectivity Issues: Enable OTG:…

Based on the user guide for the BEIER GT100, the Type-C port on the headphones is primarily intended for charging or for use with…

Thank you for your feedback. To help you get started with your Logitech G435, here are the essential setup steps: LIGHTSPEED Connection (PC, Mac,…

To activate the gaming mode on the ASUS ROG Cetra True Wireless Gaming Headphones, you can follow these steps: 1. Ensure that the headphones…

To connect the Raycon RBH861-22E-BLA Gaming Headphones to your device, you have three options: Bluetooth, 2.4G USB-A dongle, or 3.5mm wire. 1. Bluetooth: a.…

To turn on the LED lights on the ONIKUMA Gaming K16RGB Surround Sound Gaming Headphones, you need to use the USB cable provided with…

To connect the RUNMUS Gaming K2 Surround Sound Gaming Headphones to your PS4, please follow these steps: 1. Start by locating the 3.5mm cable…

To adjust the microphone volume on the WHITE SHARK GH-2044 gaming headphones, please follow these steps: 1. Locate the volume control on the headset.…

To connect the OTL PRO G1 Over Ear Wired Gaming Headphones to your PC or mobile device, simply plug the 3.5mm jack from the…

To customize the sound settings and enable the 7.1 DSP surround sound on the MH6 Professional Gaming Headphones, you will need to download the…

To adjust the sound settings and utilize the additional features of the SVEN AP-U995MV Gaming Headphones, follow these steps based on the user manual:…

To connect your Logitech Pro X 2 LIGHTSPEED Gaming Headphones wirelessly to your PC, follow these steps: 1. Make sure your PC meets the…