Why does my ELEGRP sensor light turn off after 10-15 seconds even though the timer is set to 5 minutes?
It sounds like your sensor may be in Test Mode. According to the ELEGRP manual, the adjustable time delay can be set as low…
Manuals+ Q&A
ELEGRP questions & answers
Browse answered questions about ELEGRP, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
How do I test the GFCI function of the ELEGRP G20 Adapter?
To test the GFCI function of the ELEGRP G20 Outlet Grounded GFCI Adapter, follow these steps: 1. Locate the "Test" button on the adapter.…
How do I connect the ELEGRP PQR20 Waterproof WIFI Smart Plug to my WIFI network?
To connect the ELEGRP PQR20 Waterproof WIFI Smart Plug to your WIFI network, follow these steps: 1. Ensure that your mobile phone's Wi-Fi is…
How do I install the ELEGRP 2003A-BL10-ELE-WP Matte Black Electrical Wall Receptacle?
To install the ELEGRP 2003A-BL10-ELE-WP Matte Black Electrical Wall Receptacle, please follow these steps: 1. Turn off power to the electrical outlet: Before starting…
How do I install the ELEGRP 2003A-WH10-ELE-WP Electrical Wall Receptacle?
Installing the ELEGRP 2003A-WH10-ELE-WP Electrical Wall Receptacle is a straightforward process. Here are the step-by-step instructions: 1. Turn off the power to the electrical…
How do I install the ELEGRP AUR01-1542AAC-WH USB Wall Outlets Receptacles?
Installing the ELEGRP AUR01-1542AAC-WH USB Wall Outlets Receptacles is a relatively straightforward process. Here are the step-by-step instructions: 1. Safety First: Before starting the…
How do I install the ELEGRP R1815D60CCA-WH Wall Outlet?
To install the ELEGRP R1815D60CCA-WH Wall Outlet, please follow these step-by-step instructions: 1. Turn off the power to the outlet location where you're installing…
How do I install the ELEGRP R1615D42-WH Wall Outlet with USB Ports?
Installing the ELEGRP R1615D42-WH Wall Outlet with USB Ports is a relatively straightforward process. Here are the step-by-step instructions: 1. Turn off the power:…
How do I install the ELEGRP R1815D60AAC-WH USB Outlet Receptacle?
To install the ELEGRP R1815D60AAC-WH USB Outlet Receptacle, please follow these step-by-step instructions: 1. Turn off power to the outlet at the circuit breaker.…
How do I troubleshoot if the smart dimmer light switch does not turn on after installation?
If the smart dimmer light switch does not turn on after installation, here are some troubleshooting steps you can follow: 1. **Check the Bulb:**…