COREMORROW questions & answers

To connect the E70.D4S Piezo Controller to your computer for control, you have two options: RS-232/422 and USB. 1. RS-232/422: Set the DIP switch…

To set the zero position and control the displacement using the COREMORROW Piezo Controller Software, follow these steps: 1. Open the software and go…

To properly install and connect the H01 piezo fiber stretcher to the controller, please follow the steps outlined in the user manual: 1. Before…

To properly install the COREMORROW P33 Piezo Tip-Tilt Platform, please follow these steps: 1. Before attaching the mirror, clean both the mirror and the…

To adjust the COREMORROW 21067 Piezo Linear Actuator, you can use both manual coarse adjustment and piezo fine adjustment. Here's how: 1. Manual Coarse…

To connect the XD730.400 piezo objective scanner to the controller, please follow the installation steps provided in the user manual. Here are the steps:…

To properly install the COREMORROW S34.T2S/KY Tilt Platform, follow these steps: 1. Before attaching the mirror, clean both the mirror and the motion surface.…

**Installation and Connection Steps:** 1. **Safety Check:** Before installation, ensure that the cable is undamaged, the power supply has grounding protection, and the environment…

To properly connect the P92.X20 Fast Tool Positioning Stage to the controller for operation, follow these steps as outlined in the user manual: 1.…

The specific operating temperature range for the T50N81K13 Motorized Optical Mount is not available in the current documentation. Generally, motorized optical mounts of this…

**Installation Steps:** 1. **Safety Check:** Before installation, ensure the cable is intact, power supply has grounding protection, and the environment is suitable. 2. **Load…