How to use the Elitech STC-9200A with only the room (cabinet) sensor?
To use the Elitech STC-9200A with only the room (cabinet) sensor, you must configure the device to ignore the evaporator (defrost) sensor. By default,…
Manuals+ Q&A
Controller questions & answers
Browse answered questions about Controller, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Newest questionsWhy is my POW-M25-PRO stuck in night mode and not recognizing the solar panel unless I reconnect the battery?
Based on your description of the POW-M25-PRO, the issue where the voltage drops from 33V to 12-13V when connected suggests a high-resistance connection or…
Is it possible to run several AJAZZ NACODEX AKP153 units in parallel on one computer?
The provided manual for the AJAZZ NACODEX AKP153 does not explicitly state whether multiple units can be operated in parallel on a single computer.…
Why is my Senze SZ-4015B controller blinking but not connecting or working?
If your Senze SZ-4015B controller is blinking but not working, it likely needs to be paired with your console or reset. Follow these troubleshooting…
How do I fix the EC error code and whistling sound on my hygger 800W heater?
Based on the hygger HG113 manual, the error code you are seeing is likely EE (which may appear as EC on some digital displays).…
Where can I find the Modbus register list for the SmartGen HMC6000A Diesel Engine Controller?
The SmartGen HMC6000A Diesel Engine Controller supports the ModBus communication protocol via its RS485 and Link ports, as noted in section 11.1 of the…
Is the Miheyou BOX02 manual accurate, or is it for a different product like the YOCOWOCO BOX02 or Skull & Co. AudioBox?
Thank you for your feedback regarding the branding and accuracy of this manual. Based on the provided document, there is indeed some overlap in…
Is the Miheyou BOX02 manual accurate, and who is the actual manufacturer?
The user guide provided for the Miheyou BOX02 Wireless Audio Transmitter Adapter does contain internal references to YOCOWOCO. Specifically, page 12 of the manual…
What do the remaining PO positions mean and regulate, and why isn't the device turning off at the specified pressure or showing the correct pressure?
The provided manual for the IBO IVR-10 Constant Pressure Water Supply Controller only explicitly mentions "P022" and "P024" in the context of setting up…
How do I troubleshoot pressure reading discrepancies and access the parameter menu (P022, P024) on the IBO IVR-10 controller?
To address the pressure discrepancy and access the parameter menu on your IBO IVR-10, please follow these steps: Accessing the Menu: Press the UP…
How can I turn off the audible alarm signal on the device?
To turn off or disable the audible alarm (buzzer) on the DIGITEN DHTC1011, you must adjust the High/Low alarm values (HI/LO) to the "OF"…
Where is the temperature sensor connected on the Autonics TCN4 series?
The temperature sensor connection points depend on the specific model size within the Autonics TCN4 series. Based on the Connections diagram in the manual:…
How can I troubleshoot a blurry screen on a Hitachi TX18D35VMOAAA display used in medical equipment?
The Hitachi TX18D35VMOAAA is a specific LCD panel component often used in medical imaging equipment, which differs from the PSC-A32MN Central Controller for HVAC…
Can the T-X102 controller be connected to an Android phone, and is there an app for it?
Based on the official manual for the centechia T-X102, this controller is specifically designed for X-ONE consoles and PC (Windows 10 and above) using…
Where can I find the manual for the HGLRC Spector F722 3-6S AIO, and how do I fix missing OSD in my V2 goggles?
While this page is for the HGLRC Zeus35 Pro AIO, the setup for the HGLRC Spector F722 is similar as they both use the…
I have a WS2814 addressable IC FCOB LED strip and an SP530E controller. My problem is that the entire 5-meter strip does not light up. Can the length be set on the SP530E?
The provided manual for the SUPER LIGHTING LED SP530E LED Strip Controller does not explicitly mention a setting to adjust the length of the…
How do I connect the AJAZZ NACODEX AKP153 to OBS Studio for Twitch streaming?
To connect your AJAZZ NACODEX AKP153 to OBS Studio, you must first install the Stream Dock software, which is the dedicated application for managing…
How do I display the BPM on the screen of the Denon DJ Prime 4+?
To display the BPM on your Denon DJ Prime 4+ screen, the tracks must be analyzed by the Engine DJ operating system. If you…
Why is the gyroscope polling rate limited to 125 Hz in Xinput mode on the Vader 4 Pro?
The provided manual for the Flydigi Vader 4 Pro does not explicitly state a specific technical reason for a 125 Hz gyro limit in…
How do I use the Gyroscope mapping joystick, Turbo mode, and color cycle lighting modes on the Lenovo SW Pro Wireless Controller?
Based on the Lenovo SW Pro Wireless Controller manual, here are the explanations for the functions you mentioned: Turbo Mode: This allows for rapid-fire…
How do I check the battery level on the Fantech EOS Pro II WGP15V2?
To check the battery level on the Fantech EOS Pro II (WGP15V2), you can observe the LED indicators on the controller. While the manual…
What is the color code for connecting an RGBW LED strip to the Tuya WT1 controller?
The Tuya WT1 is a 2-channel controller designed specifically for Single Color (DIM) or Dual Color (CCT) LED strips. It is not compatible with…
Is there an error in the manual regarding the arpeggiator speed values in the Main View section?
Thank you for your feedback regarding the Main View section of the Exquis manual. You are correct in your observation of how musical note…
Where can I find a replacement remote for the Changtu Electronic CT-577 fan?
To find a replacement remote for the Changtu Electronic CT-577, you should first check with the original manufacturer or the retailer where the fan…