Controller questions & answers

Based on the YoloDeck User Guide, customization is handled directly on your YoloBox Ultra (currently the only compatible device) without the need for a…

If your Rain Bird ESP-9V buttons are unresponsive after a battery change, first ensure the display is active. The controller turns off the display…

To configure your PowMr MPPT-60A for a LiFePo4 battery, you must first set the battery type to 'Lithium' and then manually adjust the charging…

To configure the PowMr MPPT-60A for a LiFePo4 battery, you must use the Manual Setting mode. Please ensure your solar panels (PV) are disconnected…

It sounds like the Turbo Combo Function has been accidentally activated for your L2 button. When this is active, holding the button causes it…

To set your iPower Digital Temperature Controller to keep your greenhouse at or above 10°C, follow these steps: Set the Unit to Celsius: If…

The iPower Digital Temperature Controller allows you to set a Low Temperature Alarm (AL) to notify you if the temperature drops below a specific…

It appears you are encountering translation errors in the Italian version of the manual where technical MIDI terms have been translated literally (e.g., "Pan"…

According to the troubleshooting section of the Rain Bird ESP-9V manual, there are two primary reasons why the display may be blank: Sleep/Power Save…

The GameSir T4 Pro includes several advanced features or "subtleties" beyond basic pairing that can enhance your experience: Back Button Programming: You can program…

No, a single 12-20V solar panel will not work to charge a 48V battery bank with the PowMr BSC3048 controller. According to the manual,…

To resolve RTK connection issues and achieve an "auto fix" mode on your Hi-Target iHand55, you must configure the Hi-Survey Road software, which is…

If your Heise HE-CHASE-CB controller is not responding to the remote or connecting to your phone, please follow these troubleshooting steps: Check Power: Ensure…

According to the PowMr M1210P manual, the error code E13 indicates Solar Reverse Polarity. This means the positive and negative wires from your solar…

The PV array indicator (labeled as indicator ⑧ in the manual) does not have a single fixed color for all states; instead, its behavior…

Yes, the GameSir X2 Bluetooth controller is compatible with the iPhone 13, as the manual specifies it supports iOS 13 or above and accommodates…

To resolve the issue where your ZL button is stuck in Turbo mode or bound to the Turbo key, you can try clearing the…

If your iPower Digital Temperature Controller has stopped working suddenly, please check the following troubleshooting steps based on the manual: Check Power and Connections:…

Based on the Orbit B-hyve Smart Indoor Sprinkler Controller manual, the appearance of an icon in the upper right corner after rain typically indicates…

According to the AC114 Remote Instruction manual, limits are set individually. To set a limit position, follow these steps: Enter Limit Setting: Press and…

To re-establish the connection between your wireless switch and the WS1057 receiver, you should follow the Switch Pairing Method outlined in the manual: Ensure…

According to the Felicity Solar MPPT Solar Charge Controller User Guide, the POWER ON/CHARGING indicator (Green LED) has two distinct states: Solid On: This…

It appears you are reporting missing components (the top 3 inclined rotor blades) for your Atlas 7 KW system delivery. Please note that Manuals+…

The PAL PCR-2Z lighting controller is designed with specific terminal blocks for two zones (Z1 and Z2). According to the manual: Terminal Capacity: The…