How do I configure settings for RTK auto fix mode on the Hi-Target iHand55?
To resolve RTK connection issues and achieve an "auto fix" mode on your Hi-Target iHand55, you must configure the Hi-Survey Road software, which is…
Browse answered questions about Controller, including setup, troubleshooting, compatibility and maintenance.
To resolve RTK connection issues and achieve an "auto fix" mode on your Hi-Target iHand55, you must configure the Hi-Survey Road software, which is…
If your Heise HE-CHASE-CB controller is not responding to the remote or connecting to your phone, please follow these troubleshooting steps: Check Power: Ensure…
According to the PowMr M1210P manual, the error code E13 indicates Solar Reverse Polarity. This means the positive and negative wires from your solar…
The PV array indicator (labeled as indicator ⑧ in the manual) does not have a single fixed color for all states; instead, its behavior…
Yes, the GameSir X2 Bluetooth controller is compatible with the iPhone 13, as the manual specifies it supports iOS 13 or above and accommodates…
To resolve the issue where your ZL button is stuck in Turbo mode or bound to the Turbo key, you can try clearing the…
If your iPower Digital Temperature Controller has stopped working suddenly, please check the following troubleshooting steps based on the manual: Check Power and Connections:…
Based on the Orbit B-hyve Smart Indoor Sprinkler Controller manual, the appearance of an icon in the upper right corner after rain typically indicates…
According to the AC114 Remote Instruction manual, limits are set individually. To set a limit position, follow these steps: Enter Limit Setting: Press and…
To re-establish the connection between your wireless switch and the WS1057 receiver, you should follow the Switch Pairing Method outlined in the manual: Ensure…
According to the Felicity Solar MPPT Solar Charge Controller User Guide, the POWER ON/CHARGING indicator (Green LED) has two distinct states: Solid On: This…
It appears you are reporting missing components (the top 3 inclined rotor blades) for your Atlas 7 KW system delivery. Please note that Manuals+…
The PAL PCR-2Z lighting controller is designed with specific terminal blocks for two zones (Z1 and Z2). According to the manual: Terminal Capacity: The…
To adjust the differential (parameter Hy) on the Copeland XR02CH digital controller, follow these steps: Enter Programming Mode: Press and hold the SET and…
Based on the provided instruction manual, the SILVERCREST 414502 is explicitly designed for use with the Nintendo Switch console. The manual does not list…
If your Felicity Solar MPPT Solar Charge Controller is not turning on, even with correct polarity and before connecting the solar panels, here are…
Based on the manual for the DELTACO GAMING GAM-103-W, the 3.5mm audio port is intended for connecting a microphone, headphones, or a headset. However,…
To set your PowMr MPPT-60A for a 4S lithium battery pack with a 16.80V charging limit, follow these steps. Note: All manual settings must…
Based on the available documentation for the ipega PG-9097, there is no mention of motion control or a 6-axis gyroscope feature. The manual highlights…
If your GuliKit KK3 MAX is showing a green light (full charge) but will not stay powered on wirelessly, you should first attempt a…
The provided manual for the Bonacell RH-LR004 Wireless Controller does not contain specific information regarding warranty coverage. However, it does state under section "16.…
Based on the YoloDeck Quick Start Guide, there are a few important considerations for your setup: Mode Requirement: The manual explicitly states that "YoloDeck…
If the LED on your CURT Echo does not light up when plugged into the 7-way connector, it usually indicates a power issue rather…
Based on the Fantech WGP14 Nova manual, a blinking light typically indicates a charging state or a low battery condition. If your controller is…